• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Trade TRADE HEIGHT GAUGE FOR INTERNAL MICROMETER

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brian Rupnow

Design Engineer
Project of the Month Winner
Joined
May 23, 2008
Messages
14,917
Reaction score
8,219
Location
Barrie, Ontario, Canada
I bought this new about 12 years ago for $100. It is for use with a granite surface block, but I never bought one and the height gauge has never been used . The scale is marked with imperial inch units on one side and millimeters on the other side. It registers from 0" up to 12".
I want to trade it for an internal micrometer, that will measure from 1" up to at least 3" inside diameter. Email me [email protected]
GMqSah.jpg

HI1EyO.jpg

0FOxdD.jpg
 
Hey Brian, what make is this? It looks like a decent one. Are there not loads of internal mics on Ebay in your area? Here in UK/Ireland there are loads of 2nd hand ones for <30£. You may even find a seller who is willing to ship to you from the UK.

Re your requirements, what sort of dimensions are you looking at measuring? 0-1", 2-8", etc?

Just a thought. Not sure what you paid for your height gauge, but just wanted to float that idea to you.
 

Latest posts

Back
Top