• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Wanted Wall 30cc Single Cylinder Drawings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 31, 2010
Messages
306
Reaction score
69
I am in need of a set of drawings for the Wall 30cc single cylinder engine that I just purchased.
Thanks
Tim Meyer
503149D6-003B-4C27-A54C-DA629498B1D0.jpeg
9121B538-6A28-49AC-A25C-56289884F28D.jpeg
 
A bit of a rare beast
 
I *think* I may actually have a plan sheet for this... The trouble is, I'm not exactly sure where! I think it is in a box with the engine, in a storage locker. :-( I'd have no problems helping you out, but I don't have any immediate plans to go searching for the plans....
 
Hi Tim,
I have some trips coming up so I'm not sure I'll be able to help you here for a bit. The bigger problem is that I bought my Wall is that I bought it almost a side note. My main interest were a few other engines. Now, that doesn't mean I'm not interested in the Wall, it just means that it is on the back burner's back burner, so to speak. But.... I *am* interested in helping you. I feel very strongly that we all need to support one another, and I know how frustrating it can be to be searching for information and only hear crickets.

Alan
 
Nothing in that book. There are a couple of photos of other wall engines but not this one.
 
It's an Elmer Wall design so not the Gary Moore one.
 
A handwritten note in the right-hand column of pt.1, pg. 1 indicates the source for the castings is Elmer Wall.
 
Red Dog if you look at the images in the magazine article you will see that it's not the same engine, crankcase mountings are different, cylinder on this engine is flange mounted but one in the mag long head studs etc. And at 1" bore it's not going to be 30cc, it's the smaller 10cc one.

I may have the Carb drawing for this engine but that's all.
 
Last edited:

Latest posts

Back
Top