Rudy Steam Tractor

Shop deals on ebay
Find deals on amazon
Advertise with us
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
3

34046

New Member
Joined
Jul 30, 2018
Messages
2
Reaction score
0
Drawings call for 3.25 inch dia for front wheela and 4.5 inch for rear wheels. I have 3 inch and 4.5 inch tube in stock . Would appreciate members thoughts on wether the smaller diameter for the fronts would look out of proportion please ?
Thanks
Stuart

 
34046 said:
Drawings call for 3.25 inch dia for front wheela and 4.5 inch for rear wheels. I have 3 inch and 4.5 inch tube in stock . Would appreciate members thoughts on wether the smaller diameter for the fronts would look out of proportion please ?
Thanks
Stuart
Click to expand...
FYI I built the tractor and used 3" and 4 1/2 and it looks just fine. Obviously you have to change the mount to compensate for the slightly smaller wheel. The tractor is not a true scale model of the original.
 
You must log in or register to reply here.

Similar threads

raveney
1916 65 HP Case Traction Engine 1/16 Scale
4 5 6
Replies
111
Views
21K
raveney
raveney
K
Darracq 25HP 1/4 Scale Model
Replies
9
Views
2K
timo_gross
timo_gross
P
Machine Tool Alignment
Replies
4
Views
3K
pete
P
O
Lower cost design for a water brake for a dyno.
2
Replies
37
Views
11K
Owen_N
O
P
Lawrence Merlin V12
2 3
Replies
42
Views
11K
Bentwings
B

Latest posts

Back
Top