Make the reservation for my V4 engine project
- Thread starter minh-thanh
- Start date
Help Support Home Model Engine Machinist Forum:
I agree with Cosby. I number all my engines like a Chevy. Not because that's what most people do but because I have worked on many and dont need to look things up. Just know the firing order. I had a small block Ford and always had to verify things like that. Go with what makes it easiest for you.
Hi ALL !
Update 3 my V4 project :
I change the width in crankcase, the old size is not enough for bolts
Update 3 my V4 project :
I change the width in crankcase, the old size is not enough for bolts
Last edited:
Great start!
Hi All !
Can i use this data for my V4 engine ?
link :
http://modelenginenews.org/techniques/hucks_cams.html
Can i use this data for my V4 engine ?
link :
http://modelenginenews.org/techniques/hucks_cams.html
You can if your crankshaft is configured the same as the Peewee. Yours will also share a firing order with the Peewee
Thanks stevehuckss396 !
It seems my engine are a little different,
I have recalculated, I hope it is right
This is my "amateur" way
It seems my engine are a little different,
I have recalculated, I hope it is right
This is my "amateur" way
Hi All !!
Update 4 my V4 project
Update 4 my V4 project
- Joined
- Sep 19, 2015
- Messages
- 274
- Reaction score
- 80
Minh Thanh some nice work there mate.
Cogsy
Well-Known Member
Looking good Minh!
You have done a very nice job on your engine. I like the the camshaft housing design.
Chuck
Chuck
- Joined
- Oct 1, 2010
- Messages
- 1,340
- Reaction score
- 393
That's coming along very well. Your skills are growing with each new project.
Keep up the great work.
--ShopShoe
Keep up the great work.
--ShopShoe
Thanks for all the compliments and "like"
I will try to make it run , I hope !
I will try to make it run , I hope !
Hi All !
Update 5 my V4 project :
Update 5 my V4 project :
You've built a very interesting pushrod arrangement. I'm looking forward to seeing it in action.
There are hex shapes at the base of your valve springs. Are your valve cages threaded and screwed into the heads?
Chuck
There are hex shapes at the base of your valve springs. Are your valve cages threaded and screwed into the heads?
Chuck
Cogsy
Well-Known Member
That's an interesting idea for valve cages that I've never encountered before. Seems very handy - thanks for the info.
Hi All !
Yesterday, I wanted to know : my engine could run ? ... so I let it try
AND : it lives
Yesterday, I wanted to know : my engine could run ? ... so I let it try
AND : it lives
Well done! Congratulations.
Chuck
Chuck
Cogsy
Well-Known Member
That is impressive - and built so fast. Congratulations!
Similar threads
