• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Wallace and Steevens Road Roller Castings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

joerom

Well-Known Member
HMEM Supporting Member
Joined
Mar 8, 2012
Messages
245
Reaction score
110
I have what I believe to be a full set of castings minus the rolls I am going to sell..This thing is in 4 1/2 scale and will be 52" long and would weigh 500 pounds when done...I do have rolled rear rings to make your own rolls and you can get discs on ebay to make them...The problem with this is that it takes 2 people to lift the castings I have, so there is no way I would ship this..To give you an idea of the size, the rear rolls in the pictures are a little over 16", so you can see the size of the castings..Drawings are also included...The last picture is what it would look like when finished and to give you an idea of what it is, if you did not know already....You would have to come and get them here in PA..If you have an interest PM me...
IMG_0991.JPG

IMG_0992.JPG

IMG_0993.JPG

IMG_0994.JPG

roller.jpg
 
Last edited:

Latest posts

Back
Top