Tiny Inline 4 Cylinder IC

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kcmillin

Project of the Month Winner!!!
Project of the Month Winner
Joined
Jan 19, 2010
Messages
1,193
Reaction score
41
Iv'e been waiting a long time to post a thread in this section, and am proud to say I have finished the TI4.

Here are the pics.

CIMG2209.jpg


CIMG2208.jpg


CIMG2200.jpg


CIMG2213.jpg


CIMG2214.jpg


CIMG2215.jpg


CIMG2216.jpg


CIMG2221.jpg


CIMG2225.jpg


CIMG2218.jpg


CIMG2222.jpg


CIMG2210.jpg


Kel
 
Congratulations, Kel!

That is a nice looking little 4 cylinder. I like the style and the rocker cover really sets it off.

I've enjoyed following your build.


Regards,

Chuck
 
Great job Kel, I like the 4 into 1 exhaust header. Yeah just great.

John
 
Kel

That is a fantastic looking engine. I have been waiting to see the finished picture and it was definitely worth the wait. Now comes the fun of playing with it. Thanks for showing it to us. Thm:


Cheers *knuppel2*

Don
 
Oh, Man, you covered up the rocker arms! :big: Looks great Kel. Very nice project.

Chuck

Edit:

The tubing work on the engine is very nicely done.

Chuck
 
I love the engine Kel...Well Done!

:bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow:


Dave
 
nice job kel, looks real good. waiting to hear it run. jonesie
 
Fantastic Job Kel
Congratulations Buddy :bow:
Pete
 
Thank you very much guys! Your kind comments are much appreciated, and it fuels my ambition. This is truly an amazing forum, one of a kind. When it comes to model engineering not everybody gets it, but here, all is shared amongst people who do. The help received here is priceless, I can safely say that this engine would not have been possible without this place.

Steve, Whats next? Hmmm, I have been waiting to do something a little simpler before the next big project. I have been contemplating coming up with some strange engine, or combination of different engines. Something stupid, pointless, and without purpose, but an actual running engine. It will have to have a lot of extra motion and do dads that have an integral part of the engine, but at the same time completely unnecessary. Like a Rube-Goldberg device, but an engine. I have not put too much thought into yet though. It might not be so simple after all.

Kel
 
As I said before Kel. Great sounding engine and seems to have plenty of spunk. Thm:
I sent you a PM today but don't know if youy had a chance to read it yet. If it is not there, let me know and I will resend it.

I am in need of a small 1/2HP electric Motor turning around 1725 RPM for my Gene Switzer Cam Grinder. Had a motor/gearbox from a hospital bed with 90 RPM from the gearbox. Took the gearbox off of it and get 1050 RPM from just the motor. Would have to use some weird pulley combo to get 12,000 RPM from my grinding spindle.

Always looking for a small diameter motor I can use on that thing with at least 1725 RPM.

Anyway, the 4 cyl Inline is a great project you should be proud of. Was just wondering if you were going to place it in the download section or maby sell sets of plans for it or what.
Ray (ironman)
 
Kel,

Late for your party - sorry ................another great motor. :bow: :bow:

Best Regards
Bob
 

Latest posts

Back
Top