Something to drive ??

Advertise with us
Shop deals on ebay
Find deals on amazon
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hello,

Now that our IHC Famous engines are ready soon, these engines should also drive something.
For this purpose, the Myers pumps are to be built.
I have already started with the first parts on my CNC milling machine.

k-20171022_162312.jpg


k-20171022_165146.jpg


k-20171022_174039.jpg


k-20171022_193642.jpg


20190226_104139.jpg


20190226_120138.jpg


20190226_163834.jpg


20190303_110248.jpg


Greeting Toby
 
Hello,

another part has just finished.
After milled the part in aluminum first, it occurred to me that parts had to be soldered on the back.
So I also milled the parts out of ST37 steel. It worked better than expected.

Since my father also wants to have a Myers Simplex (the red pump), I have milled two of them.

So now each two pumps are built. That's the plan.

20190304_145812.jpg

20190304_180622.jpg


Greeting Toby
 
Hello,
it is almost an almost finished part.
This is the counterpart to the Myers Simplex gear, the red pump.

Myers-Simplex-01.jpg


20190316_092740.jpg


Greeting Toby
 
Hello everyone.

So much time has passed, unbelievable.

In the meantime, the Myers pumps, like the IHC Famous, have been completed by my father and me.

It was a long way to get there, but it was fun and gave us a lot of experiences.

My father turned the pump columns.
The gears were pre-turned so I could mill the spokes.
The pulleys were also turned and milled.

After I sealed the pumps last week, the pumps were able to pump water for the first time.

Here are a few short videos about it.



https://youtube.com/shorts/q3eUvSZHG_c?feature=share
https://youtube.com/shorts/B4IRq2D-huo?feature=share
Greetings Toby
 

Attachments

  • 20211110_045439.jpg
    20211110_045439.jpg
    138.1 KB · Views: 28
  • 20211110_045459.jpg
    20211110_045459.jpg
    138.2 KB · Views: 29
  • 20211110_045538.jpg
    20211110_045538.jpg
    94.7 KB · Views: 26
  • 20211110_045542.jpg
    20211110_045542.jpg
    116.8 KB · Views: 28
  • 20211110_045435.jpg
    20211110_045435.jpg
    156.8 KB · Views: 27
  • 20211110_045448.jpg
    20211110_045448.jpg
    143.7 KB · Views: 27
  • 20211110_045520.jpg
    20211110_045520.jpg
    106.1 KB · Views: 25
  • 20211110_045527.jpg
    20211110_045527.jpg
    118.1 KB · Views: 31
  • 20210504_150116.jpg
    20210504_150116.jpg
    316.6 KB · Views: 31
  • IMG-20200312-WA0028.jpg
    IMG-20200312-WA0028.jpg
    103.1 KB · Views: 29
You must log in or register to reply here.

Similar threads

StretchNutsTheClown
I need some guidance on building a steam powered pump for central heating.
Replies
19
Views
2K
Niels Abildgaard
N
timo_gross
Not an engine! More a "function model" of a machine.
Replies
11
Views
997
timo_gross
timo_gross
W
Finally got back into the workshop
Replies
11
Views
3K
Weldsol
W
edholly
Holly Buddy Build Register
Replies
6
Views
2K
minh-thanh
minh-thanh
K
Anzani Fan Type 1/4 scale model
Replies
9
Views
4K
kenr
K

Latest posts

Back
Top