straight 6

sition · Feb 17, 2019

Will different distances of carburetor intake pipe affect imbalance?

bobden72 · Feb 17, 2019

How is the compressed air getting from the turbo to the carb inlet ? Very nice work mind. Ah just noticed the intercooler in front of the rad, all clear now.

ARUP · Feb 17, 2019

Hi- beautiful work! Are any pictures available of the assembled crank shaft? The counterweights are 'full circle'?

Shopgeezer · Feb 17, 2019

A mini turbo with intercooler! Thats amazing. Are both wheels straight vanes or did you manage to curve them?

kuhncw · Feb 18, 2019

I would also like to see photos of your assembled crankshaft.

Thanks.

Chuck

sbdtasos · Feb 18, 2019

FKreider said:
Wow, fantastic work!

Are the distributor and exhaust pipes 3D printed?? Will they hold up to the head without melting?

Anxiously awaiting videos of it running!

distributor cap is from derlin cnc machined and the exhaust pipes are from air contitioner copper pipe 8mm od 6mm id

sbdtasos · Feb 18, 2019

mayhugh1 said:
Beautifully executed. Great choice of finishes also. - Terry

thanks Terry
i admire also your work that is amazing

sbdtasos · Feb 18, 2019

Shopgeezer said:
A mini turbo with intercooler! Thats amazing. Are both wheels straight vanes or did you manage to curve them?

thanks both wheels are with curved fins

sbdtasos · Feb 18, 2019

here is first start

bobden72 · Feb 18, 2019

Lovely sounds as good as it looks.

e.picler · Feb 18, 2019

Wonderfull, Marvellous!
Congratulations Sbdtasos. A piece of art.

Ansious to see it runing again.

Edi

michael-au · Feb 19, 2019

nice looking engine, sounds good too

IgorW · Feb 19, 2019

Amazing work! I hope its not too much to ask but would you like to share some details about the turbo? Are you planning on connecting it to the intake? I know its probably not going to make any boost at this scale but i still fancy the idea. Keep it up! Cheers!

stef110 · Feb 19, 2019

super nice build!

ShopShoe · Feb 20, 2019

That is wonderful: Both to look at and to listen to:

thank You for posting,

--ShopShoe

Johno1958 · Feb 20, 2019

Nice and lumpy sound and a great build.
Cheers
John

popnrattle · Feb 21, 2019

beautiful music to my ears. Thanks for posting.

Kenny Broomfield · Feb 22, 2019

So newbie question. Is that a kit kit or barstock? Where did you find plans or supplies? Very nice work.

neil_1821 · Feb 23, 2019

That’s absolutely beautiful, great craftsmanship and sounds as good as it looks. Were these built to plans or is it your own design?

sbdtasos · Feb 25, 2019

neil_1821 said:
That’s absolutely beautiful, great craftsmanship and sounds as good as it looks. Were these built to plans or is it your own design?

thanks for the goog words its my own design

straight 6

Help Support Home Model Engine Machinist Forum:

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Edi from brazil

Well-Known Member

Junior Member

Member

Senior Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!