Sansspaceship
Active Member
- Joined
- Jan 6, 2017
- Messages
- 37
- Reaction score
- 9
Hi All,
Thought that a would share my experience with my latest tool - the Nikcole mini system that I came across and purchased. In short it comes with a variety of inserts starting at circa (0.019) used for cutting small grooves both straight and radiused for things like o-rings seats.
This the product website for those that might be interested is below.
http://www.niko-nikcole.com/home.htm
I had to cut some groves for 5/32 snaprings in some SS and while it is early days with this new tool, was suitably impressed.
Will post some photos tomorrow.
Cheers,
.adrian
Thought that a would share my experience with my latest tool - the Nikcole mini system that I came across and purchased. In short it comes with a variety of inserts starting at circa (0.019) used for cutting small grooves both straight and radiused for things like o-rings seats.
This the product website for those that might be interested is below.
http://www.niko-nikcole.com/home.htm
I had to cut some groves for 5/32 snaprings in some SS and while it is early days with this new tool, was suitably impressed.
Will post some photos tomorrow.
Cheers,
.adrian
