The Beginning of another I. C. Engine,

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Please could provide the reference/type of carb you bought at Hobbyking ?

Yves.
 
Please could provide the reference/type of carb you bought at Hobbyking ?

Yves.

The Carb for the Rockerblock engine is a

APS FS91AR carb assy 0.91cu.in 15CC

sku:FS91AR-80801X

Hope that helps

DavidLloyd
 
Good morning,

I run the Rockerblock engine on a home made carburettor designed by Chuck Fellows, very easy and quick to build and the engine runs a treat. I can let you have the plans if required.

Regards,

Max.
 
Thanks a lot to both of you for your answers !
I'm really planning to build that engine, even if it will be some delay before I can do it.
But, I'll do it for sure, I'm interested by both solutions (buy & build), and I am curious to see how to build such carb.

Therefore, I would enjoy if you could already provide to me the drawings.
 
Thanks a lot.
When I was a boy, around 50 years ago, somebody gave me an RC plane engine, and the carb was quite similar to the one you provided the drawing !

The carb needle was missing, and as I was mechanically speaking, alone, I spent a long time, trying unsuccessfully to let it run.

To build such a carb would be quite a sort of 'revenge' on that for me :) !
 

Latest posts

Back
Top