Expo update 2017

PTsideshow · Mar 4, 2017

Now for the bad news for those coming from Detroit and points north on South bound I-75. You can pick which you think will be best for you. As the detours ends at the exit for one road to Wyandotte
http://www.75rougeriver.com/detours.html

PTsideshow · Mar 11, 2017

South bond I 75 is closed and more bad news the North bound side up and over the Rouge River bride is down to one lane. what a pain in the seat cushion. With all the people trying to cut in the working lane as far up as they can. Took I 94 to M-39 south then M-39 to M-85 turn right south to Northline road left to either 4th st and turn right till you get to the Yack which is on 3rd and Oak st.

stevehuckss396 · Mar 11, 2017

PTsideshow said:
South bond I 75 is closed and more bad news the North bound side up and over the Rouge River bride is down to one lane. what a pain in the seat cushion. With all the people trying to cut in the working lane as far up as they can. Took I 94 to M-39 south then M-39 to M-85 turn right south to Northline road left to either 4th st and turn right till you get to the Yack which is on 3rd and Oak st.

When I was working at BASF while 75 was closed for the gateway project we used 75 to Clark Street. Take Clark to Jefferson and run that all the way down to Maple or Sycamore. It's a good way to go if you are coming from the north like me. Little to no traffic on Jefferson.

PTsideshow · Mar 12, 2017

That was going to be my next try, Living 1 1/4 miles from exit 234 on 94 it is easy to jump on it hit 696 then 75 they do try to make it difficult to get around. they had barrels and signage at the entrance ramps at Northline road I think it could be a pia either way It was 48 miles the new route. At least the traffic will be lighter on the week end.
Styeve the wife hello.

stevehuckss396 · Apr 19, 2017

It's here finally. Should be in the Yack before noon on friday. Hope to see some of you there.

PTsideshow · Apr 20, 2017

Set up is almost complete . Vendors will start off loading at 3

m today.

purpleknif · Apr 20, 2017

I'll be there.

michael-au · Apr 20, 2017

just wondering if anyone will post some pictures for the people that live on the other side of the earth and can't make there

thank you
Michael

Expo update 2017

Help Support Home Model Engine Machinist Forum:

PTsideshow

Well-Known Member

PTsideshow

Well-Known Member

stevehuckss396

Model Engineer

PTsideshow

Well-Known Member

stevehuckss396

Model Engineer

PTsideshow

Well-Known Member

purpleknif

Well-Known Member

michael-au

Well-Known Member

Similar threads

Latest posts

Expo update 2017

Help Support Home Model Engine Machinist Forum:

Well-Known Member

Well-Known Member

Model Engineer

Well-Known Member

Model Engineer

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!