slaurenson
Well-Known Member
- Joined
- Nov 4, 2012
- Messages
- 61
- Reaction score
- 42
Hey everyone,
just finished my first wobbler which was based on the Western Kentucky University plans, As mentioned on this forum previously, the plans, while freely available are missing a number of critical dimensions around the valve plate and cylinder, if anyone wants these I am happy to provide the dimensions that I used to make the engine run.. it's not to difficult to work it out.
So now it's back to my double acting engine I started 3 years ago!!
very addictive to see something you built run for the first time.
[ame]https://www.youtube.com/watch?v=sWgzahmPJLM[/ame]
just finished my first wobbler which was based on the Western Kentucky University plans, As mentioned on this forum previously, the plans, while freely available are missing a number of critical dimensions around the valve plate and cylinder, if anyone wants these I am happy to provide the dimensions that I used to make the engine run.. it's not to difficult to work it out.
So now it's back to my double acting engine I started 3 years ago!!
very addictive to see something you built run for the first time.
[ame]https://www.youtube.com/watch?v=sWgzahmPJLM[/ame]