• If you have bought, sold or gained information from our Classifieds, please donate to HomeModelEngineMachinist and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Ic engine castings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wirralcnc

Well-Known Member
Joined
Jul 24, 2010
Messages
92
Reaction score
23
What do you have under the bench.
Looking to buy untouched ic engine casting sets to add to my collection. Have a large number of complete casting sets so only really interested in obsolete or genuine old sets.
Good money for the right sets.
 
Are you only interested in obsolete or old designs? Does that mean you would not be interested in a 1/4 scale W, or Y, or six cylinder Anzani casting set? Or are you looking for simple single cylinder engines to build?

I also provide sheltered housing for Orphaned model engine casting sets but I am also willing to provide a caring loving home for those that have been pre-loved (started).

Jo
 
Dynamotive merlin
R1830 bruce satra
R985 bruce satra
Morton m5 bruce satra
Les chenery Aeronca
Gnome radial
ageless engine drawings/ castings
Channel island specialx2
Bentley br2 inlet castings.
Elmer Wall wizard
Elmer Wall four.
Morrison marvin pacific vapour engine.
Edgar westbury atom kiwi crossman twin seagull sealion 30cc.
Gypsy major.
Southworth twin tandem corliss..etc this list is off the top of my head. Lots of smaller single cylinder engines as well
 
Kirt at Hemmingway has the patterns for the Aeronca that Joe made the other year ( I have castings :thumbup:)

CIS not sure if my supplier has another set I may have brought the last... he won't have two sets that he is willing to sell one person.

BR2 castings are available from Doug Hewson.

I need a flywheel for my Wall Wizard set of castings. :wall:


Most of those Westbury engine castings are still available from Kirt (many not advertised). Not sure what you mean by the "Crossman". Are you getting confused with his Craftsman twin? Or the cherub Twin? Both sets of castings are happily housed in warm dry boxes in my library, along with a set for Ladybird :D

Gypsy Major: again Joe did some patterns which are now with Kirt. (The castings that came from them are also nice).

The Southworth Twin Tandem Corliss is still available from Bob Potter. I hope you have a lot of space its a huge engine! I have the cross compound Corliss with the air pump.

Copies of collectable/rare single cylinder aero engines castings from WW2 time maybe easier to find.

Jo
 
Jo
That list is what I have. I've never dealt with hemingway.

I do mean the craftsman twin. (Been a long day).

I met Bob potter few months back when I collected my castings. Great quality. Over 50kg of castings. Double flywheel. They are sat in a box in bedroom as i can't physically lift them into loft.It will be a beautiful engine. I'm tempted to buy the single as well.
 
Have you thought about making them without castings, there are quite a few that can be carved from solid or fabricated. I have just been making a Stuart Turner Lightweight this way.

lightweight_zps7trgvi8b.jpg


And the small aero engines are easy enough to carve out like this Italian pair

HPIM1599_zpsrvwai8bh.jpg
 
Well Robbie my casting supplier says you will have to identify what engines you would like to build as he will not let out lists of what he has available. He considers that, taking into account their rarity, they should go to people who want to build one of the specific engines rather than selling them to people who want them for hording sake.

Jo
 
Hi Jo I'm not hording these casting sets. I have all intentions of building them all. I do have age on my side as I'm only 36.
I have already built a couple of bar stock engines. Edwards radial and just completing the howell v4.
Robbie
 
Has anyone ever done drawings and casting for some of the classic motor bike engines like the Manx Norton, 7R AJS etc ?

I know various people have built them as one off's but did they ever become commercial items ?
 
I don't think so John, would have thought it was possible to lay your hands on original drawings or an engine to measure, as they are usually done to about 1/3rd scale you should not have to make too many compromises to size.
 
Not that I am aware but I have considered doing a scaled down version of one of my bike engines myself.

Some of the casting sets, like those Anzani's I mentioned are by invitation only, the original designer not wanting the hassle of selling the things commercially. The other option is like what Joe did: He made the patterns for himself, did a few sets for his mates :thumbup: then decided it was too much hassle and passed them on to someone else to make available.

The problem is Kirt has too many engine patterns now and I am not sure when or if they will be seen commercially.

Jo

P.S. I am still missing the Fan type Anzani engine from my collection... Da Da—Dum, Da Da—Dum, Da Da—Dum :D
 
Spent a little time in loft making a list of what I have. So below is a revised list.
Westbury seagull x2
Stuart turner lightweight single
Peewee v4
Wall 604 duplex marine
Wall wizard flat twin
Atom* x2
Pratt whitney R985 radial
Pratt whitney r1830 radial
The phoenix edgar westbury
Wall 10cc single
Orr tornado 65
Westbury whippet x2
Westbury sealion x2
1938 chunn chum
Single j5
Channel island special x3
Feeney x2
Dynamotive merlin
Gypsy 1/4 scale
Lindberg hornet
Br2 inlet castings x2
Titan 60 x2
Windsong
1938 bantam
Falcon 1 5cc by 1066
Peewee set from karl spielmaker
Vivell no drawings
M and m no drawings
Nova no drawings
Atom minor
Morton m5
Cave cobra 1946
Wall 4 cylinder
Featherweight* wall aero rotary valve (falcon)
Kittiwake
Falcon flat twin ( John t Fergusson)
Condor Flat four ( John t Fergusson)
Gnome x2
Aeronca
Brown jr
Holt caterpillar
Wright j5 radial heads& rockers require crankcase
Daimler 1885
Mercedes 1909
Corliss* tandem twin. (Twin flywheel)
 
I don't know what the rest of the crew thinks but it looks like about 2-1/2 lifetimes of machining to me.
gbritnell
 
You always have been an optimist George.
Gail in NM
 
I think the guys are right you need to turn the question on its head: What have you made so far from castings and how long did it take you? And how long do you think that lot is going to take to make? Based on your age you may wish to consider the possibility of getting side tracked from making swarf by girl friends or starting a family :thumbup:.


Jo
 

Latest posts

Back
Top