Does anyone recognize PRO-D-SAW?
- Thread starter gjrepesh
- Start date
Help Support Home Model Engine Machinist Forum:
Lakc
Well-Known Member
Looks like a nice piece. I will get my guess in and vintage it circa 1961 in case anyone starts a pool. 
Never seen one before, however, sorry.
Never seen one before, however, sorry.
idahoan
Well-Known Member
- Joined
- Oct 7, 2008
- Messages
- 594
- Reaction score
- 210
Dave, I finally got around to doing some followup work on the saw. Your post has been very helpful. I now have some good cutoff blade info. And I have some vise ideas since the original vise on mine is long gone and what was cobbled on is rather useless and will be replaced. Thanks. Gary R.
idahoan
Well-Known Member
- Joined
- Oct 7, 2008
- Messages
- 594
- Reaction score
- 210
Hi Gary
I have an ACM saw also missing the vise; I just have never taken the time to design one and get it made. I really should do that as there are times when the little saw would come in handy. If you make a vise for yours please post a picture; I would like to see it.
Dave
I have an ACM saw also missing the vise; I just have never taken the time to design one and get it made. I really should do that as there are times when the little saw would come in handy. If you make a vise for yours please post a picture; I would like to see it.
Dave
Similar threads
