gold stamp mill
- Thread starter raym 11
- Start date
Help Support Home Model Engine Machinist Forum:
ChooChooMike
Well-Known Member
- Joined
- Jan 5, 2008
- Messages
- 864
- Reaction score
- 13
I've got some pictures of a real stamp mill. I'll try to get a few uploaded in the next few days. 
I thought we had a brief thread on them over on the old board, but again, the only drawings I remember were full-size versions. Quite a few of those about, and the dimensions mostly don't look critical (the stamping order becomes interesting though)
stampmillbuilder1
New Member
- Joined
- Dec 29, 2013
- Messages
- 1
- Reaction score
- 0
I build operating stamp mills in 3 different scales (1:24, 1:36 and 1:48).
I have also built an operating six level mill building which is now in the Sterling Hill Museum in NJ.
For more info please contact me at [email protected].
Morris
I have also built an operating six level mill building which is now in the Sterling Hill Museum in NJ.
For more info please contact me at [email protected].
Morris
Tin Falcon
Well-Known Member
- Joined
- Jul 9, 2007
- Messages
- 7,207
- Reaction score
- 787
Morris:
This is a forum where ideas are shared and discussed. So I encourage you to share your Ideas,, photos videos and experiences with building these fine models and help others.
While the focus of this forum is model engine building we do encourage all forms of model building to preserve history and promote craftsmanship.
It is general protocol here and on most forums to introduce yourself. so please post an introduction in the welcome section tell us about yourself your shop and more about your model building interests. Also please add your location this helps us help you.
And for the rest of us here is a video of his fine work.
[ame]http://www.youtube.com/watch?v=HdsPE62Ivvs[/ame]
Tin
This is a forum where ideas are shared and discussed. So I encourage you to share your Ideas,, photos videos and experiences with building these fine models and help others.
While the focus of this forum is model engine building we do encourage all forms of model building to preserve history and promote craftsmanship.
It is general protocol here and on most forums to introduce yourself. so please post an introduction in the welcome section tell us about yourself your shop and more about your model building interests. Also please add your location this helps us help you.
And for the rest of us here is a video of his fine work.
[ame]http://www.youtube.com/watch?v=HdsPE62Ivvs[/ame]
Tin
ChooChooMike
Well-Known Member
- Joined
- Jan 5, 2008
- Messages
- 864
- Reaction score
- 13
Wonderful model !
