My 6 Cylinder Design

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi all

Finally finished the design of my 6 cylinder engine. I have over 1000 hour in this design, The models overall length of the stand is 20" long, 8" wide, 18" high. It has a bore of 1.125" stroke 1". The crank shaft will have two choices of build, 1 piece, or multiple pinned parts. All components have to be fabricated from bar stock. Water cooled with pump, Oil fed with pump up through head and returned through cam box to sump. Now I have to annotate all the drawings, which I estimate will be around 200. Total components is about 300. I will have a full parts list, with links for parts to be purchased. I will be selling the plans when complete on a CD with all drawings in pdf format for $25.00. If you are interested you can contact me. I have added a few assembly drawings to show how the drawings will look.
CHECK OUT THE VIDEO'S ON VIDEO PAGE
Jack

[email protected]
Draw-Tech

View attachment 62222

View attachment 62229

View attachment 62230

View attachment 62231

View attachment 62232

View attachment 62234

View attachment 62349
 

Latest posts

Back
Top