self retracting screwcutting toolpost
- Thread starter bentprop
- Start date
Help Support Home Model Engine Machinist Forum:
d-m
Well-Known Member
- Joined
- Mar 20, 2008
- Messages
- 211
- Reaction score
- 5
Thought I would jump back on this thread. I built this 3-4 months ago now and never really got a chance to try it. Today I was finishing up some new tool holders and decided to tool them all up and get them set on center. I pulled all the holders off the shelf (I think 12 of them now) and found this, got all the others set up and thought I would give this a good try out. I set up for a fine thread 40 TPI. Hope the pic will show what a nice easy job that tool made it.
Dave
![DSC04093[1].jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/14/14194-DSC04093-1-.jpg "DSC04093[1].jpg")
![DSC04094[1].jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/14/14195-DSC04094-1-.jpg "DSC04094[1].jpg")
![DSC04096[1].jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/14/14196-DSC04096-1-.jpg "DSC04096[1].jpg")
Dave
Similar threads
