rake60
Well-Known Member
- Joined
- Jul 8, 2007
- Messages
- 4,756
- Reaction score
- 124
A buddy stopped in the other evening with a gift for me.
It's a 1/2" diamond impregnated drill bit that wouldn't pass inspection where he works.
The diamond is uneven in one spot.
I asked him what I could do with it and he suggested I try taking across the face of a grinding wheel.
I took a single pass with it across a grinding wheel that is at least 1/2" smaller than it's original diameter
and was pretty rutted up.
I'll accept a scrap tool like that one ANYTIME!
Rick
It's a 1/2" diamond impregnated drill bit that wouldn't pass inspection where he works.
The diamond is uneven in one spot.
I asked him what I could do with it and he suggested I try taking across the face of a grinding wheel.
I took a single pass with it across a grinding wheel that is at least 1/2" smaller than it's original diameter
and was pretty rutted up.
I'll accept a scrap tool like that one ANYTIME!
Rick
