My I.C. engines

RaceSoft · Aug 25, 2010

Hi all!

I long time looking on this interesting forum and now i decided show my I.C. engines.

My first engine is obbligato Webster 4-stroke engine. I spend cca 4 months construct and next 3 months advances of his start. Finally he runs.

[ame]http://www.youtube.com/watch?v=oH68cwEvLKE[/ame]

Second thing is Antique Farm engine from magazine "Strictly I.C.". I making on if cca 3 month and he is run without problems.

[ame]http://www.youtube.com/watch?v=eY_yK2g6KkA[/ame]

On both engines i make few construction changes according with my tools.

Next planed engine is Atkinson engine by Jan Ridders (thanks Mr. Ridder). New project start in winter. If You want see on my other engines (steam), you can visit my album on Photobucket (http://s191.photobucket.com/albums/z173/RaceSoft/Engines/)

Thanks for Your patience.

Petr

P.S.: Excuse my bad English. I lot a years learn Russian.

fltenwheeler · Aug 25, 2010

Hi Petr

Welcome. Very nice engines.

Tim

Maryak · Aug 25, 2010

Пётр здороваться,

Peter hello to you,

Добро пожаловать на наш форум wEc1

Welcome to our forum. wEc1

Best Regards
Bob

PS Don't worry about your English, its much better than my Russian. I am still struggling with Руский Язык which is my wifes native language.

GailInNM · Aug 25, 2010

Petr,
Welcome to HMEM.
Very nice workmanship on your engines.
Your English is just fine. Very understandable.
Gail in NM

rake60 · Aug 26, 2010

Welcome to HMEM Peter.

Beautiful engine!

Rick

CMS · Aug 26, 2010

Some nice engines you've got there. Good job.

rudydubya · Aug 26, 2010

Welcome Peter. Nice running engines. I also enjoyed looking at your album on Photobucket. Do you have any pictures of your shop and machinery?

Regards,
Rudy

RaceSoft · Aug 27, 2010

Hello all!

Many thanks to all for your welcomes and lovely comments.

2Maryak: Your Russian is sure better than my - I learned this language many years ago (about 20). But thanks for your support.

2rudydubya: At this time I don't have any pictures of my shop, but I make any shots and set up on this forum with short comment. Thanks for your interest.

Regards,
Petr

bentprop · Aug 27, 2010

Hallo,Petr,beautiful engines.I love the sound these engines make.
Welcome to the forum.

RaceSoft · Aug 31, 2010

Hello,

I make some shots of my shop. Here is general view of my shop - small part of boiler-room in my house:

Here is my work-desk (recently finished). Drill press is Einhell SB 501/1:

And at last my home-made mini lathe made my father. I must make some repairs and improvements (digital measuring):

Thx for your interest.

Petr

rudydubya · Aug 31, 2010

Peter, thanks for sharing the pictures of your shop. Did you make your engines with the lathe built by your father? Nice looking work desk also.

Regards,
Rudy

zeeprogrammer · Aug 31, 2010

I always enjoy seeing pics of someone's workshop.

And for me, it's like an invite to someone's house. Much appreciated.

RaceSoft · Sep 2, 2010

2rudydubya: Yes, lathe built by my father (cca 30 years ago), stand below with wheels I did myself before 2 years. Dad built the "diesel" engines for model aircraft. He was very skillful.

2zeeprogrammer: Everybody is welcome! Any time.

Petr

BenPeake · Sep 3, 2010

Hi Peter

I loved your engines. Someone has already said that they sound great, and I'm going to have to agree with them on that one! I'm going to have to attempt an IC engine soon.

Thanks for the tour of you workshop as well.

Ben

ariz · Sep 4, 2010

Petr not only you build very beautiful and good running engines, but having built them with relatively small, simple tools is the evidence of your excellent skills
congratulations :bow:

RaceSoft · Sep 10, 2010

Thanks for all your words praise. It is for me entangling.

Regards,

Petr

m_kilde · Sep 10, 2010

Hi Petr

Just came by you post

I too think you have made some very nice job.

I also have to agree that the fact that you have build the engines using the homemade lathe, is very impressing.

My first lathe was also homemade, by my self, and I made my very first steam engine on this machine

Sadly I do not have any picture of this lathe

RaceSoft · Sep 16, 2010

Hi m_kilde,

thanks for your reply. Your beam engine is look good. I made wood beam engine before circa 3 years too.

Petr

My I.C. engines

Help Support Home Model Engine Machinist Forum:

RaceSoft

Member

fltenwheeler

Well-Known Member

Maryak

Well-Known Member

GailInNM

Administrator

rake60

Well-Known Member

CMS

Well-Known Member

rudydubya

Well-Known Member

RaceSoft

Member

bentprop

Well-Known Member

RaceSoft

Member

rudydubya

Well-Known Member

zeeprogrammer

Well-Known Member

RaceSoft

Member

BenPeake

Project of the Month Winner!!!

ariz

Well-Known Member

RaceSoft

Member

m_kilde

Well-Known Member

RaceSoft

Member

Similar threads

Latest posts

My I.C. engines

Help Support Home Model Engine Machinist Forum:

Member

Well-Known Member

Well-Known Member

Administrator

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Project of the Month Winner!!!

Well-Known Member

Member

Well-Known Member

Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!