Recent content by rmw
Help Support Home Model Engine Machinist Forum:
-
R
timing stwarts popcorn engine
I built one double size using Brian Rupnow's inch plans. After adjusting the valve to cover (or expose) both ports identically, I set my eccentric 90 degrees ahead of the crankshaft in the direction I wanted the engine to run. This seems to work pretty well on most slide valve steam engines I...- rmw
- Post #2
- Forum: General Engine Discussion
-
R
Mill drawbar repair
I had to do that the other day. I didn't think to use a nut to sync up the threads.. Good idea! Greg- rmw
- Post #3
- Forum: Machine Modifications
-
R
Ignition Coils - cheap, quick qnd easy
I'm interested! This is terrific information - thanks for sharing, and please post about the circuit when you can.. Greg- rmw
- Post #2
- Forum: Tips & Tricks
-
R
Taking a break from the machine shop... Tree House? Is This a Treehouse?
Wow. You did perfect!- rmw
- Post #2
- Forum: The Break Room
-
R
How do you indicate on 4-jaw?
I ground a point on one end of a 1/8" diameter rod, about 14" long. I put this in my tail stock drill chuck, and use an indicator as close to the workpiece as I can get. Very quick and pretty darn accurate.. Greg- rmw
- Post #7
- Forum: Tips & Tricks