Quantcast

nealeb's latest activity

Help Support HMEM:

  • N
    nealeb replied to the thread Torch for silver solder..
    The torch handle has two controls - main gas flow and pilot flow - so you can adjust according to the burner fitted. For example, if I'm...
  • N
    nealeb replied to the thread Torch for silver solder..
    Getting back to the original question! TerryD pointed to the basic Sievert torch, which is fine, but particularly if you are going to be...
  • N
    nealeb replied to the thread Torch for silver solder..
    To clear up any misunderstanding - my problem was silver-soldering a machined phosphor-bronze component to another brass component. I...
  • N
    nealeb replied to the thread Torch for silver solder..
    The world seems divided into two - those who insist that only the old and generally banned Cd-bearing solders ("the only way to get the...
  • N
    At least the software and all its data are kept on your local machine. At worst, even if you never get another update, you have...
  • N
    Try this link. Definitely says free non-expiring licence. Takes more learning than F360 but looks more powerful once you get there. I'm...
  • N
    nealeb replied to the thread What to charge to thread a rod.
    I mentioned earlier that my local area rate of exchange is the bottle of wine. I handed over the house nameplate I have just made for a...
    • LF.jpg
  • N
    nealeb replied to the thread What to charge to thread a rod.
    Standard rate of exchange round here (South Devon, UK) is a bottle of red wine. Two bottles if it's a big job... I'm in the middle of...
  • N
    nealeb replied to the thread Carburetor with accelerator pump.
    I have come across "submerged jet" carburettors which avoided the need for an accelerator pump by putting the main jet at the bottom of...
  • N
    I gave up about the time I discovered that on one side of the pond you pay a bill with a cheque and on the other side, a check with a...
Top