Recent content by Naiveambition

Admittedly the more I look at it, the more I still want to finish the model. It was to a point that most operations are lathe related as I still have my lathe. After selling off the mill and it’s related workholding, the task seems rather daunting. I’ve been looking into small milling...

I have sold the grinding rest, center indicator, and the knurler. Everything else is still available

Hey all, I’m looking into what would be a fair pricing of a motor I can no longer finish and would hate to see it in the scrap pile. I made a double size kerzel hit and miss from plans on the internet, so anyone should be able take over from here. As you can see i made the alum. body, with...

I’ve sold my mill and no longer need most of this stuff. So if you’re interested in anything u see msg me and we will work out a fair price. I’d rather give u guys a chance before the eBay Harold hall grinding attachment with mag bases and drill sharpener. Mituyo 3 piece gauge set. Spi...

I have new in the box plan set for Ron colonna 270 offy. Not sure what I paid but the cover says 90$. Sounds high to me so I would take 65$ w free shipping in the u.s. outside US the shipping is on you after and agreed sum

I have new in the box plan set for Ron colonna 270 offy. Not sure what I paid but the cover says 90$. Sounds high to me so I would take 65$ w free shipping in the u.s. outside US the shipping is on you after and agreed sum

As far as I know machine zero is front left for homing. My work zero changes dramatically though. I'm having trouble finding a correct one thru fusion. And ugs seems to always be opposite of what he screen shows. After the other night disappointments I went to try some files knowing that...

some success tonite and as usual only one step. I can get the machine to home and it will finish its cycle and wait, like it should. Buttt!!!!! Wanna guess? Homes perfect in ugs. Doesn't do anything in grbl. I spent a good while with a new file trying to perfect my orientation to match the...

Leonardo, thanks for putting up with my ?s. That's what I love about the hmem community and wish the world was more accepting to freely shared knowledge. Hats off to you my friend Yes I am referring the the grbl panel. and yes all my axes move in the correct directions, but the lag time is...

Finally made it back to the machine. And while I would LOVE to report good news, again failure. So hooked up limit switches , set all needed setting, and now it will try to home only the z axis by slamming all the way to the work for 20 sec. Even reset the mm inches and still a parser error...

Great thanx 1610 cnc router Amazon,eBay etc... Woodpecker board . JLB steppers nema 17 Lead screw measures 8 mm with 2mm pitch Grbl.9j Ok have had some success. Was able to complete program using grbl. All axes were moving. I unlocked grbl, done a soft reset, and used...

I'm sure my posts seem angry by nature, although not pointed at anyone, I am just getting tired of all the doors I try are slammed in my face concerning cnc. Trying to find a definitive option is still elusive concerning setups. Some use candle, some arduino, some ugs, so my problem is any one...

I am able to get the machine under GRBL , to move under the g0 commands as expected The jog does work for the z very slowly. It shows the correct amount of movement for the jog steps, just crazy slow. but the x,y, keep reporting errors of undefined feed rate. In the grbl panel I have changed...

After some more research tiny accomplishments were made. Although reading up on the grbl settings for $100-$122 are quite puzzling Some state the math being a high number such as 444, and some suggest low numbers like 40 for 100-101-102. Then for the 110-111-112 & 120-121-122 are...

South Houston is my local, but I don't know anyone who could help, but I am usually a diy'er to my bones so, off we go. Ok have tried grbl. As of now I cannot connect the jog controls Error states undefined feed rate. Gonna try to fix here in a few. Also noted was, my file would load and...