Mousetrap

hi folks: As a frequent lurker and learning much from the HMEM community I wanted to share this project. Its not exactly a working...

Hello community! I just introduces myself shortly on the new members thread today. I gave also a few impressions of my workshop there...

Well after more than 13 years Peewee got a make over. The pipes were in bad shape so they were replaced. I the ignition fixed. She got...

Finally first "non printed" "now virtual" part.

Hi, I finished Stewart Harts (Potty Engineering) design of the Simpson & Shipton steam engine. It was built from all bar stock, except...

The next step was to make the timing gears. A friend had loaned me a complete set of Strictly I.C magazines and I read them thoroughly...

The crankcase parts are the front, back and timing gear cover. I made some drawings to determine where the cutter path would be for the...

In this thread I will present a short description of my construction of a 1/4 scale model of the Anzani Fan Type engine of 1909 with...

A little something I made about 5 years ago it's an 1873 Parrot rifle if I remember right. The wheels are solid oak banded with...

I recently completed this engine. It is fairly true to scale and seemed weird at the time. For example, a 8" flywheel with 3-48 and...