It has good acceleration but hope to increase slightly.
As you can see now you have direction.
https://youtu.be/7CcQHTlhg3s
I also changed the transmission ratio of 3: 1 to 2: 1, still can reduce more for speed.
Thank you for your comment.
Hello!
I spent time doing things. I have resumed work and show them progress.
Wanted to make sure everything was fine doing a pressure test with water. To pump the water to the boiler I made a non-return valve and a cylinder with a piston to inject the water (build another non-return...
Hello,
The first tests with the steam car was not all good .
Before starting the engine well oiled all the parts , including oil spilled by the steam and lubricating valves and cylinder.
Initially operating it was fine but soon removed the steam valves and cylinder oil and adding expansion by...
Hi friends,
I want to show my design for the new boiler of my vehicle.
The largest copper tube that I have is 54 mm. in diameter. I have designed a double boiler for greater capacity.
I'm cutting the pieces.
Do not know how to stay. When the show is finished.
Greetings to all.
Corrado, thanks for your message.
This engine has no planes. I designed it in my head. I started making cylinders and pistons. Other parts creating them as I needed them.
I just made two or three simple drawings.
You're right, its shape match well with a paddle steamer.
Greetings.
Thanks Terry_S.
No part says that. I put this picture to better identify them.
If you have any questions let me know. I have problems with the language, but I'll try my luck best answer.
Greetings.