Have you fellas dialed in both ways? From the spindle to the bore then from the table to the spindle? On the subject of dividing plates I never use mine anymore. I put together the Rotary Controller from “World of Ward” and have not looked back. Check out his web site. The unit is a snap to...
On some or a lot of tables you will find the center of the RT centered off the spindle will be different than if you center the RT off the table. Check it out
So did I and maybe some of the more expensive ones are. But just for giggles put a magnetic dial on the Rotary table and run the indicator around your spindle or better yet inside your spindle,you might be surprised
Hey guys. All the conventional wisdom says to align a rotary table you put a dial or a coaxial indicator or a rod in the spinal and swept the center hole of the rotary table. Than rotate the spindle and 0,0 your table. OK..........After you do that put the dial on the rotary table top and sweep...
Brian
Please let me know how i can get a set of drawings for you hit and miss
Tks
Jerry McCracken
PS Here is a pic of my car. 5 year build started driving it last year. 34 Ford
I have a surplus 4-3/8” Grizzly rotary table with attached DRO. It work beautifully. Vey tight and easy to use.Paid over $1200.00 CAD for it. Never really used on a job. I would like to get $750.00 for it. FOB here.
John VL I have made one rod a master now I can get the unit to rotate with out jamming up. But this still does not answer my question of the air valve. When I inject air into the system the way the brass valve is made air is being injected into 3 cylinders at the same time trying to drive them...
I am in the process of adding a stepper motor and driver to my 8” rotary table . The stepper I am going to use (Nema 23} has a shaft out both ends. I want to.
1-take the handle and dial off the rotary table
2-Mount the stepper to the RT shaft via flex cplg
3-Mount the handle and dial to the...