Recent content by Jeroen Jonkman

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Brass Stirling '60'

    Brass Stirling '60'
  2. J

    Brass Stirling '60'

    Brass Stirling '60'
  3. J

    Jereon Jorkman's stirling 60

    Dave (and others who are building / are going to build / have downloaded the plans), you are right, the connecting rod were missing from the plans. I could not find the time to update the plans as the flaw was discovered at the release, and forgot all about it later! :wall: :wall: :wall: Just...
  4. J

    Jereon Jorkman's stirling 60

    Great job Dave! I was thrilled to see another Stirling 60 and hope you had a good time building it. It looks beautiful, congrats! Jeroen Jonkman, Vlaardingen, The Netherlands
  5. J

    Plans for Brass Stirling '60'

    Hi Ian, the displacer was turned from solid, with the inner radius made with a drill-bit shaped especially for the job. The inner radius is not critical, I just wanted to take out as much of the weight I could. After the drilling/boring the workpiece is flipped in the chuck and the outer radius...
  6. J

    Plans for Brass Stirling '60'

    Hello everyone, as promised, plans can be found using http://www.homemodelenginemachinist.com/index.php?action=tpmod;dl=item270 Have fun! Jeroen Jonkman
  7. J

    Brass Stirling for dad

    I would like to thank you all for your appreciation and flattering comments! :bow: Please check the "download" section of the forum for the now finally completed set of plans. http://www.homemodelenginemachinist.com/index.php?action=tpmod;dl=item270 Have fun and don't hesitate to ask if there...
  8. J

    Brass Stirling for dad

    Thank you very much! Please find other engines at http://www.youtube.com/JeroenJonkman I always plan on making more drawings as I go, but there just doesn't seem to be any time to spare when I'm making an engine!
  9. J

    Brass Stirling for dad

    Hi everyone, I've been busy making this Stirling engine for my father's sixtieth birthday and completed it a few days ago. As most of you will notice I've taken the design idea of the 'Hog' engine and started sketching. The most challenging part came out to be the bearing for the displacer...
  10. J

    My Flame Gulper

    Hi Nick, glad you got it figured out! Trying to find the best result can take a long time, but at least you can say it is completed! It looks like the end of your wick is actually burning, which is not optimum because of the contamination being sucked in. Try to allow for a loose fit of the...
  11. J

    My Flame Gulper

    Nick, so glad I've seen your video! You are so close now, this is an exiting and happy time. You wrote about your flywheel, and how you are not sure what to do. I have changed the flywheel too and it seems to run at least just as good as the original one. I'm not saying you should change...
  12. J

    Hello from the Netherlands.

    Hello, my name is Jeroen Jonkman, and as of today I am a enthusiastic user of your wonderful forum! Can't believe how much information is shared, tips and tricks to discover and beautiful engines to see to trigger my attention. I have been active in this exiting hobby for about 18 months now...
  13. J

    My Flame Gulper

    Hello Nick, I've just found this forum and your amazing posts on your version of the flame gulper. You've asked me some questions about my flame gulper on YouTube, and now I've seen yours, I'm sure that it is only a matter of a few more hours before it runs. Everything looks nice, well build...
Back
Top