Recent content by babolottino

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. babolottino

    I recommend building homemade gym bench

    hello I should handcraft a gym bench measures: 12 inches wide, 48 inches long, 17 inches high, more or less I think they are the optimal measures. I should make the metal frame and the wooden top. I would like to make a structure that is simple to create, sturdy and aesthetically pleasing, light...
  2. babolottino

    robust industrial shelf construction tip

    thanks guys for everything, today I made the frame, in 40x40 x 2 mm box for the uprights and 50x30x2 mm for the crossbars, I made 3 iron ladders that I combined with two-meter long longitudinal bars I have to finish it and make the shelves hopefully it will hold, I have burned my eyes for a long...
  3. babolottino

    robust industrial shelf construction tip

    thanks for the valuable tips
  4. babolottino

    robust industrial shelf construction tip

    thanks your intervention. I have to store very heavy engine parts
  5. babolottino

    robust industrial shelf construction tip

    thanks for your valuable suggestions, before putting my plans into action I have to put in order and discard useful things and odds and ends thanks again for the precious suggestions I should perhaps take a high-capacity pallet rack. thanks anyway
  6. babolottino

    robust industrial shelf construction tip

    thanks, you have been very kind, sorry if I took advantage of your patience, which material for the columns and the crosspieces would you recommend? I'm sorry if I'm boring and I insist. Thanks again
  7. babolottino

    robust industrial shelf construction tip

    thank you for your suggestion. you may attach photos or demonstration images. Would you say that I should make a lattice structure like a bridge or Eiffel tower? quite right? if you can make me a sketch, sorry if I'm petulant and fussy thanks
  8. babolottino

    robust industrial shelf construction tip

    hello I should make an industrial metal shelving to be placed against the wall. measures: length L 2,5 meters, height H 2 meters. depth P 1 meter. must bear heavy loads, any useful suggestions? thank you
  9. babolottino

    help building small loft for home-made workshop

    the structure is covered by an iron shed with a maximum height of 3.50 meters, I would have thought of a box in iron on the net, I saw a man who used a rectangular box 100x 50 x 2 mm, I see it a little weak at a distance to cross to the beams to better share the weight of the load that spaced...
  10. babolottino

    help building small loft for home-made workshop

    hello for reasons of space I would like to realize a small loft, dimensions length 2.50 meters height 1.90 meters, depth, 2.20 meters, total local height 3.50 meters. How do you advise me to make it sturdy economically and quickly? thanks
  11. babolottino

    Crowbar lever craft construction

    Making A Burke Bar sorry if I reopen the discussion what do you think of the BURKE bar, better crow bar, how could I make it to handle big heavy and bulky loads? I think it could be useful for heavy work I think it's very versatile and robust, am I wrong?
  12. babolottino

    help council design realization fence in corrugated sheet of my laboratory

    Vorrei fare i pali verticali in una scatola di 50 x 50 x 3 mm lungo 2 metri, 50 cm piantarli nel terreno con i colpi di una mazza, le traverse tenerli e realizzarli con scatola 50x 30, 2 mm, li equilibrio ai poli e su di essi avviamo i pannelli, cosa ne pensi, il palo esce dal suolo a 1,50 metri...
  13. babolottino

    help council design realization fence in corrugated sheet of my laboratory

    hello, I should fence off my workshop, eleven meters long, a meter and a half high, I thought of making an iron frame and screwing corrugated sheets for roofing, like a shack to be clear, what material I use for the frame of the structure, as I do to plant the pillars in the ground? use boxed or...
  14. babolottino

    help building canopy protective shelter for car parking

    I wanted to create three parallel portals, put the perimeter beams on it and place the crossbars on top to anchor the purlins on which to fix the roof covering. a friend of mine had suggested a cantilever-type shelf structure, like a tensile structure, what do you think? cartort canopy...
Back
Top