Handed Stuart Triple

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Steamingandy

Active Member
Joined
Dec 10, 2021
Messages
37
Reaction score
44
Location
Hampshire UK
Slightly different Stuart Triple this time, it’s will have a bronze base cast from a 3D print (not by me) the rest of the castings are an eBay set of that has had the cylinder block started, but I will need to rework it to change the inlet/outlets over.
The crankshaft is one I made earlier from stainless I will also use stainless for all the steel bar stock, well that’s the plan.
A59660FD-3B0F-41C4-B445-74D50018F25D.jpeg
 
Process I use for manufacture of the connecting rods hopefully the pictures tell the story
 

Attachments

  • 6A0D1780-42A7-49BA-8860-B07E19B45657.jpeg
    6A0D1780-42A7-49BA-8860-B07E19B45657.jpeg
    103.7 KB · Views: 4
  • 70A902F1-2F91-46B8-AF80-3E17BC7FBA8A.jpeg
    70A902F1-2F91-46B8-AF80-3E17BC7FBA8A.jpeg
    109.9 KB · Views: 3
  • 48E70D0E-68E6-4B87-9ABF-DA041FB7983F.jpeg
    48E70D0E-68E6-4B87-9ABF-DA041FB7983F.jpeg
    106.5 KB · Views: 3
  • 828941D6-F34E-4D06-B63E-B56E523B9961.jpeg
    828941D6-F34E-4D06-B63E-B56E523B9961.jpeg
    106.1 KB · Views: 5
  • 357606CE-D3C1-4A4F-9BD5-29A60D5CE833.jpeg
    357606CE-D3C1-4A4F-9BD5-29A60D5CE833.jpeg
    102 KB · Views: 3
  • 417D2C24-0CCC-4161-A0C3-0A41434377A5.jpeg
    417D2C24-0CCC-4161-A0C3-0A41434377A5.jpeg
    105.6 KB · Views: 3
  • 50964E6D-57EA-4CB7-8707-E7B8C568EBDE.jpeg
    50964E6D-57EA-4CB7-8707-E7B8C568EBDE.jpeg
    104.1 KB · Views: 3
  • 902CE928-485B-4DEE-AC3C-8E8078450DBB.jpeg
    902CE928-485B-4DEE-AC3C-8E8078450DBB.jpeg
    119.1 KB · Views: 6
  • 56DDB531-8F36-4C95-A6EB-5C1B815C2EFF.jpeg
    56DDB531-8F36-4C95-A6EB-5C1B815C2EFF.jpeg
    114.1 KB · Views: 4
  • 965AB4CB-427D-4D6F-B269-B6B0D13F479E.jpeg
    965AB4CB-427D-4D6F-B269-B6B0D13F479E.jpeg
    108.5 KB · Views: 4
And the rest
 

Attachments

  • 246ED7FE-0405-4BA3-A4D4-0582FE5D2683.jpeg
    246ED7FE-0405-4BA3-A4D4-0582FE5D2683.jpeg
    113.1 KB · Views: 3
  • F168196C-2823-4055-9A8B-7ADA32BED474.jpeg
    F168196C-2823-4055-9A8B-7ADA32BED474.jpeg
    154.4 KB · Views: 5
  • 051265FA-B720-4FAE-ABD8-36A7101787A6.jpeg
    051265FA-B720-4FAE-ABD8-36A7101787A6.jpeg
    93.5 KB · Views: 3
  • 69F21C7D-4895-4D17-8231-0F64BCB2CE48.jpeg
    69F21C7D-4895-4D17-8231-0F64BCB2CE48.jpeg
    123.3 KB · Views: 3
  • A69EA21A-A1EE-45E0-BF6D-5E600B021260.jpeg
    A69EA21A-A1EE-45E0-BF6D-5E600B021260.jpeg
    103.8 KB · Views: 6
  • 2E70B2F2-67A2-4001-9967-69AF1B4E18D8.jpeg
    2E70B2F2-67A2-4001-9967-69AF1B4E18D8.jpeg
    97.2 KB · Views: 4
  • 15C790B8-EECB-4918-A379-33D2A79FFEF8.jpeg
    15C790B8-EECB-4918-A379-33D2A79FFEF8.jpeg
    101.2 KB · Views: 4
  • 663C745F-341E-4AAF-891F-8D653896FD46.jpeg
    663C745F-341E-4AAF-891F-8D653896FD46.jpeg
    113.2 KB · Views: 3
Hi Steamingandy
I am learning from you build pics, I will be starting these parts shortly and I very much like your method of producing the connecting rods I will do the same when I get to these parts. My build has slowed lately as paying work is being done and a short holiday soon will post again soon.
Cheers
emers
 
Hi Steamingandy
I am learning from you build pics, I will be starting these parts shortly and I very much like your method of producing the connecting rods I will do the same when I get to these parts. My build has slowed lately as paying work is being done and a short holiday soon will post again soon.
Cheers
emers
Emers
forget to add I did the taper @ 1deg it comes out about right
 
Steamingandy
Thanks I will keep this thread handy and re visit when I start my parts.
Did you get this kit part completed and where're do you look for them.Love the base casting.
Cheers
Emers
 
Just remembered don’t throw the end pice of material it’s perfect for machining the outside of the big ends
 

Attachments

  • 22209CE7-C77F-4A52-92A9-61F728445A84.jpeg
    22209CE7-C77F-4A52-92A9-61F728445A84.jpeg
    270.1 KB · Views: 2
Last edited:
I have never seen a solution for supplying oil to the big ends, so I decided to try this a 1.6mm hole through the rod with a countersunk hole at the top under the cross head, it will either work or fling oil over the cross head, we will see.
 

Attachments

  • E0DEB63C-04EA-4F14-8F60-BE0B0E9F97AD.jpeg
    E0DEB63C-04EA-4F14-8F60-BE0B0E9F97AD.jpeg
    246.4 KB · Views: 4
  • CA3AAFE3-2EDD-4FF4-ABA6-AD396288C5A2.jpeg
    CA3AAFE3-2EDD-4FF4-ABA6-AD396288C5A2.jpeg
    281.2 KB · Views: 3
A little more progress on the handed Stuart triple, the first machining of a newly cast bronze base, it will certainly stand out from the standard engines, the pictures show the process steps.
 

Attachments

  • 0A2C679F-24D4-4E1E-BC64-979175546630.jpeg
    0A2C679F-24D4-4E1E-BC64-979175546630.jpeg
    318 KB · Views: 6
  • 7AE97690-E2D0-42C7-8BAC-15F1E4A3E1A4.jpeg
    7AE97690-E2D0-42C7-8BAC-15F1E4A3E1A4.jpeg
    124.7 KB · Views: 5
  • BF7A578D-E356-46AE-894E-A38F436FDEC7.jpeg
    BF7A578D-E356-46AE-894E-A38F436FDEC7.jpeg
    111.6 KB · Views: 3
  • 634F185B-5ACE-49D4-9F93-E7268CEC8936.jpeg
    634F185B-5ACE-49D4-9F93-E7268CEC8936.jpeg
    120.2 KB · Views: 3
  • 20B901BA-FF36-42E8-8A8D-FDE081EDEAD2.jpeg
    20B901BA-FF36-42E8-8A8D-FDE081EDEAD2.jpeg
    121.8 KB · Views: 3
  • 4F3250C6-9867-49AA-BCB8-7CCCBD1F3AA6.jpeg
    4F3250C6-9867-49AA-BCB8-7CCCBD1F3AA6.jpeg
    128 KB · Views: 6
  • 67283542-5F30-48DA-A52C-1E507F8F0C32.jpeg
    67283542-5F30-48DA-A52C-1E507F8F0C32.jpeg
    122.2 KB · Views: 4
  • 42FF43FB-29EE-40E7-AF01-7998E7196CE2.jpeg
    42FF43FB-29EE-40E7-AF01-7998E7196CE2.jpeg
    318.4 KB · Views: 4
Emers
The base was cast by a gentleman in the states who is interested in creating a Stuart triple in bronze (no worries about water left after running on steam), I have made some parts for him in exchange.
 

Latest posts

Back
Top