IHC FAMOUS PROJECT

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hanss

Member
Joined
Nov 20, 2018
Messages
11
Reaction score
5
Location
Holland
Hallo,
Dit is mijn project.

Wat vind je er van?
 

Attachments

  • P9130064.JPG
    P9130064.JPG
    109.3 KB · Views: 481
  • P9130060.JPG
    P9130060.JPG
    108.4 KB · Views: 465
  • P9130062.JPG
    P9130062.JPG
    115.2 KB · Views: 449
Congratulations,

You have built a very nice engine. It looks good and runs extremely well and smoothly.

Thank You for posting.

--ShopShoe
 
Hallo Hans,

da hast Du einen schönen Motor gebaut. Er sieht sehr nach dem Motor aus der OnderStoom aus.
Mein Vater baut ebenfalls diesen Motor. Dabei kann ich Ihm etwas helfen.
Ich habe gesehen, das Du den Magneto und den gebogenen Hebel weggelassen hast,
dafür die Ansteuerung der Benzinpumpe geändert hast.

Hier noch ein paar Bilder unserer Motoren.

Hello Hans,

Since you have built a nice engine. He looks very much like the engine from the OnderStoom.
My father also builds this engine. I can help him a bit.
I saw that you left out the magneto and the bent lever,
have changed the control of the gasoline pump.

Here are some pictures of our engines.

IMG-20190116-WA0039.jpg


IMG-20190116-WA0041.jpg


IMG-20190217-WA0008.jpg


IMG-20190217-WA0012.jpg


k-20170403_182033.jpg


20171227_111421_resized.jpg


20180103_120642_resized.jpg




Gruß Toby
 
Last edited:
Hallo Hans,

da hast Du einen schönen Motor gebaut. Er sieht sehr nach dem Motor aus der OnderStoom aus.
Mein Vater baut ebenfalls diesen Motor. Dabei kann ich Ihm etwas helfen.
Ich habe gesehen, das Du den Magneto und den gebogenen Hebel weggelassen hast,
dafür die Ansteuerung der Benzinpumpe geändert hast.

Hier noch ein paar Bilder unserer Motoren.

Hello Hans,

Since you have built a nice engine. He looks very much like the engine from the OnderStoom.
My father also builds this engine. I can help him a bit.
I saw that you left out the magneto and the bent lever,
have changed the control of the gasoline pump.

Here are some pictures of our engines.

View attachment 107781

View attachment 107782

View attachment 107777

View attachment 107778

View attachment 107783

View attachment 107779

View attachment 107780



Gruß Toby

Hallo Toby,

Dank voor je reactie en de mooie foto's.
Het is inderdaad de motor uit Onderstoom en ik heb er iets aan veranderd.
De krukas is uit een stuk metaal gemaakt, zoals je kan zien in het filmpje.
Zo bouwt iedereen op zijn eigen manier.

met vriendelijke groet,
Hans
 
Dag Hans & DIRK, zeer mooi gemaakt, ik heb hem afgelopen vrijdag zien draaien bij KMYCA, prachtig werk!!
Pierre
 
Hello Hans,
our IHC's finished last week.
All three are doing pretty well.
Unfortunately, you need 2-3 suction cycles to ignite.

We also donated a clutch pulley to the engines.

Greeting Toby

Hallo Hans,
onze IHC's zijn vorige week afgelopen.
Alle drie doen het redelijk goed.
Helaas heb je 2-3 zuigcycli nodig om te ontbranden.

We hebben ook een koppelingspoelie aan de motoren geschonken.

Groet Toby



 

Attachments

  • 20191016_121019.jpg
    20191016_121019.jpg
    111.6 KB · Views: 237
  • 20191016_121028.jpg
    20191016_121028.jpg
    101.9 KB · Views: 245
  • 20191016_121037.jpg
    20191016_121037.jpg
    109.5 KB · Views: 220
  • 20191016_121050.jpg
    20191016_121050.jpg
    115.5 KB · Views: 231
Hello Jos,

Yes, I will be there at the NVM model building show 7 december in Houten.
I hope to meet you there and see your engines.

greeting,
Hans
 

Latest posts

Back
Top