1/4 scale V8, first project.

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
ok, whilst I am getting all the drawings together, could you send us some links to your previous model building projects, to see if my plans would be suitable for you?
Cheers, Keith.
 
Kar, I would love to see a picture of the CNC milling machine that you made, I'm always thinking about making one as well.

Paul.
 
Hi' my 3 cylinders radial , ☺
and i have a flat-twin but no photo now....

2015-07-21 09.21.26.jpg


2015-05-13 19.54.11.jpg


2015-03-26 22.50.50.jpg
 
I have had a look through my drawings and sketches, and realise that it would take far too long to get them into a state where someone else could make a working engine from them.
I'm afraid I don't have the time, or incentive, to sort it all out, so, apologies to the genuine posters, but there are no drawings available for this engine.
Cheers.
 
Kar,

"OUCH", I don't know what upset you so much, I cannot see anything wrong with the suggestion by a long standing member that you start your own build log. I went back through your previous posts and cannot see the reason you said was there for posting.

Paul.
 
Is your dog's name Stew?
My dog, its name bandits. It is very cute, very clever. I like it very much.
I have not received the drawings, friend, if you have, please reply to me, thank you
 
Hello Keith5700:
My name is Johnny.
I‘m so like model engine,when I saw your V8 model engine,I'm very interested.
So,I decide to made a V8 model engine.
But,When I was in the design of the camshaft, I have some difficulties.
Can you tell me your e-mail address? because I can't insert image at here.I hope you can teach me.
Thank you very much.
Best regards!

1.jpg


2.JPG
 
Dear keith:
I'm so interested your V8 model engine.and I've start build my V8 model engine.
Could you give me your all 250 sheets of drawings and calculations straight over?
I'm so appreciate,and I really hope you can teach me made my V8 model engine.
Here's my model engine some drawings.
Now,I have some difficult,I can't completed,I need you help.
Thank you so much.
Best regards!View attachment ImageUploadedByModel Engines1440169258.891020.jpgView attachment ImageUploadedByModel Engines1440169283.989630.jpgView attachment ImageUploadedByModel Engines1440169306.623309.jpgView attachment ImageUploadedByModel Engines1440169326.234901.jpg
 
Johnny, I haven't got a full set of drawings available to send out I'm afraid.
I can send you some cad drawings of specific areas of the engine if this would help.
Can I suggest you start your own build thread, where you can tell everyone who you are and whereabouts you are in your project?
I'm sure myself, and others, will be very willing to help if we can.
Cheers.
 
Hi there, I see that the build is complete on many websites. Is there a kit you can buy to make this or anything? Really interested in owning one myself. Thanks, Kolin

[email protected]
 
Hi there, I see that the build is complete on many websites. Is there a kit you can buy to make this or anything? Really interested in owning one myself. Thanks, Kolin

[email protected]

First message and asking someone to send you the result of his efforts!

Are you going to participate or once you get what you came for, you ill run away?

I hope no one gets offended by my message, but as a machinists community there are some behaviours I am not comfortable with.
 
First message and asking someone to send you the result of his efforts!

Are you going to participate or once you get what you came for, you ill run away?

I hope no one gets offended by my message, but as a machinists community there are some behaviours I am not comfortable with.

I'm not offended, I agree totally. People are always asking "where can I buy one" etc, etc, especially in thecomment sections on youtube.

I'm always tempted to say getting an engine is simple really, just go to a community college or a technical school and take a machining course for 1-2 years. Then buy 10k or 20k or more of machine tools, and spend the next 10 years getting good at using them, and all the support equipment that goes along. Then simply spend a 1000+ hours building yourself an engine like this (at this point, you have an "engine kit"). It really is that easy.

Glad to see I'm not the only one who gets offended when some rich person whips out there wallet, credit card, check book, whatever and starts trying to offer something so impersonal, for such a personal object.

End of rant

John

Edit: Just to provide a little help to the guy looking for a V8 kit, I'm not aware of any right now. In the past something may have been offered, but since this is not a high profit business, small start up companies have a tendency to come and go, mostly go. If you want a complete engine, go talk to Connelly, who's been building engines for sale for quite a while now (his engines are very under valued imo, (I mean he's not charging enough for them).
 
I think the last two messages sum it up quite well.
Most of the requests for plans seem to come from China, although I can't imagine what they'd do with them!

I would happily sell the V8 and probably the V10 for the right price, but the most I've been offered for the V8 is £200 and the chap seemed quite put out when I declined.
 
Thats $292 USD What are you waiting for!!!


I feel your pain. I had the same reaction for a 50 dollar set of drawings. Thats only 57 cents a page. The people who don't build seem to have no concept of what it takes.

Shake it off knowing that your undertaking was huge and the outcome was spectacular.
 

Latest posts

Back
Top