New Profile Posts

Help Support HMEM by donating:

  1. tontilon
    tontilon Michael Rosenbauer
    Hallo Michael,

    ich bin ebenfalls ein Modellmotorenfanatiker.
    Ich komme auch aus Deutschland.
    Wir haben sogar das gleiche Alter.

    Vielleicht können wir uns ja austauschen?

    Ich modelliere die Motoren in 3D-CAD.

    Liebe Grüße

    Dirk Nagel
  2. Scarafaggio
    Scarafaggio gg89220
    Good afternoon where you can get engine drawings ?, Karl Benz engine 1886. Thank. Your work is very good !
  3. dnalot
    dnalot Angie
    1. Angie
      Thank you. Can you put this post on that thread about POM's? And I'll come back and check this again, too.
      Nov 5, 2019
  4. Simon Ribnikar
    Simon Ribnikar
    Working on...
  5. Hanss
    Hanss TobyTetzy
    Hello Toby

    What a beautiful engine.
    Maybe a different spring on the controller so that it runs even better.
  6. Diego Contessoto Mazzaron
    Diego Contessoto Mazzaron
    DCM tech. Special Parts.
  7. Jongeek
    Loving this new forum, Just bought a personal Laser CNC and wating for its shipment
  8. Jongeek
    Always Buying & Selling
  9. AndresitoArgentino
    Si tu no trabajas por tus sueños, alguien te contratara para que trabajes por los suyos...
  10. Dale Walter
  11. Jack Pickard
  12. Isaac Zammit
    Isaac Zammit
    Keep yourself distracted, one project after another.
  13. Clockworld
    Clockworld deverett
    Dave, I was trawiing through the site and asI have to make various studs (small BA) I was wondering if you still had the article to hand?

    Regards, Matt
  14. Imre karoly
    Imre karoly weir-smith
    my respect Bruce,

    help my Please , my Rotary Table 1:36. I do not know the correct step number setting. sorry for the bad English speak . my native language Hungaryan.

    the sketch works , there are only step errors. likely due to rotary transmission (1:36).

    thank you in advance for your help.

    Best Regards, Imre Karoly
  15. kenn
    kenn mikelkie
    Hi Mike
    Names Ken From Cape Town. I see you doing a & 1/4 Simplex Did you redraw it and any chance I could get the laser cut drawings
  16. josodl1953
  17. Swenjoy
    Swenjoy Ozwes007
    hello , i am a 25th appy and RAEME living in Geelong Vic,
    1. Ozwes007 likes this.
  18. Guido007
    Guido007 bhusted
    Hello from Germany,

    very nice drawings. My dream ist to build this engine running.
    I just startet with printing this enine in PLA.
    Bevor i start to make all drawings, i like to ask you, if you whant to sell your CAd Files?


  19. Moper361
    Moper361 George Punter
    Hi George i thought i would private message i hope you do not mind .George do you have an email address i would like to send some photos of the lathe im interested in with the tooling .you maybe able to give me an idea if its worth it or like you say keep looking at hare and forbes etc
  20. patternmaker
    patternmaker Jack3M
    Once you have filed the parting line, you then need to grab the flyheel inbetween the spokes, preferably with a six jaw chuck , since this needs to run as true as possible to look correct and be as balanced as possible when the engine is running. It will also allow you to machine most of the flywheel without rechucking it and makes it easy to machine the opposite side.