Home Model Engine Machinist > Showing Them > Photos and Videos > Odds and Ends engine--New clutch--Sawmill--Finally!!!
Reply
 
Thread Tools Display Modes
Old 05-09-2013, 06:37 PM   #1
Brian Rupnow
HMEM_SUPPORTER.png
 
Join Date: May 2008
Location: Barrie, Ontario Canada
Posts: 7,302
Liked 2351 Times on 2095 Posts
Likes Given: 24

Default Odds and Ends engine--New clutch--Sawmill--Finally!!!

Success is so sweet!!! Sometimes it just takes a while. Here is the video I have been promising for the last 3 months, of the Odds and Ends hit and miss engine I built this past winter, driving the sawmill I designed and built last year, thru the clutch I designed this winter. It is running a new sawblade that Jim Dunmyer sent me. He has built this sawmill and exhibited it at a show in Florida, and done some experimenting to see what blade would cut with the least amount of drag on the engine. The sawmill works like a charm. The new design of clutch seems to work perfectly with no drag at all on the engine, when engaged or disengaged. I will be posting all the details for this clutch on my thread "Clutch---Again". The Odds and Ends engine seems to be working very well. Right at the very end of the video, where it quits going into "miss" mode, the engine had warmed up and was running a bit rich. After I was finished the video I turned the needle in about 1/4 turn, and the engine speeded up at the leaner setting and went back into its hit and miss cycle. I am so happy to have been able to finally post a video showing all these components working so well together. Thanks for all the interest that has been displayed over the winter, as I've fought my way through all this.----Brian



__________________

Brian Rupnow
www.rupnowdesign.com

Brian Rupnow is offline  
2
People Like This 
Reply With Quote Quick reply to this message
Old 05-09-2013, 08:03 PM   #2
Paulsv
 
Join Date: Jan 2010
Posts: 212
Liked 24 Times on 23 Posts
Likes Given: 31

Default

Awesome, Brian!



__________________
Paulsv is offline  
 
Reply With Quote Quick reply to this message
Old 05-09-2013, 08:35 PM   #3
gbritnell
Project of the Month Winner!!!
 
gbritnell's Avatar
 
Join Date: Jul 2007
Posts: 2,220
Liked 290 Times on 380 Posts

Default

Hi Brian,
Very, very nice project or should I say multiple projects. It sure adds to the interest when you have 3 things operating at once. The engine didn't seem to strain at all with the ratios that you came up with.
gbritnell

__________________

Talent unshared is talent wasted.

gbritnell is offline  
 
Reply With Quote Quick reply to this message
Old 05-09-2013, 08:39 PM   #4
Brian Rupnow
HMEM_SUPPORTER.png
 
Join Date: May 2008
Location: Barrie, Ontario Canada
Posts: 7,302
Liked 2351 Times on 2095 Posts
Likes Given: 24

Default

Thanks George. That means a lot coming from a man I consider one of the finest model builders in the world. ---Brian

__________________

Brian Rupnow
www.rupnowdesign.com

Brian Rupnow is offline  
 
Reply With Quote Quick reply to this message
Old 05-10-2013, 03:25 AM   #5
cfellows
 
cfellows's Avatar
 
Join Date: Aug 2007
Posts: 3,789
Liked 664 Times on 435 Posts
Likes Given: 3

Default

Very nice, Brian. Love the sawmill! Seems to be percolating along pretty good.

Chuck

__________________

So many projects, so little time, not enough energy...

cfellows is offline  
 
Reply With Quote Quick reply to this message
Old 05-10-2013, 04:37 AM   #6
Tarheel
 
Tarheel's Avatar
 
Join Date: Dec 2008
Location: Georgia
Posts: 11
Liked 2 Times on 2 Posts
Likes Given: 18

Default

Great finish to a great project !

__________________
Tarheel is offline  
 
Reply With Quote Quick reply to this message
Old 05-10-2013, 10:03 AM   #7
jwcnc1911
-jwcnc191
 
jwcnc1911's Avatar
 
Join Date: Mar 2013
Location: AL
Posts: 598
Liked 82 Times on 68 Posts
Likes Given: 13

Default

There's a lot of fine work on that table! Good job!



__________________

-JW

Old Timer: "if you ain't pushin' it, it's draggin' ya!"

jwcnc1911 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Odds & Ends Hit & Miss Engine Harold Lee Photos and Videos 15 02-23-2014 12:22 AM
Brian Rupnow's Odds and Ends engine. Brian Rupnow Photos and Videos 4 03-19-2013 05:43 AM
odds and ends hit and miss engine steam58 Plans 8 01-16-2012 08:33 PM
automotive points for Odds and Ends Hit and Miss engine cl350rr Questions and Answers 2 11-25-2010 03:07 PM
Odds-N-Ends Engine Jeff02 Plans 10 11-29-2008 04:07 PM




- Top - Member List