Project of the Month built by gbritnell

Help Support Home Model Engine Machinist by donating using the link above or becoming a Supporting Member.
Home Model Engine Machinist > Showing Them > Finished Projects > A Tiny 3 cylinder Holt based engine

Reply
 
Thread Tools
Old 10-19-2017, 08:41 PM   #1
gbritnell
Project of the Month Winner!!!
 
gbritnell's Avatar
 
Join Date: Jul 2007
Posts: 2,510
Liked 535 Times on 522 Posts

Default A Tiny 3 cylinder Holt based engine

Gentlemen,
Well the engine is finished and running. If you followed the build thread then you know the construction and initial running wasn't without incidents.
Today I took it out on the bench and after a few adjustments it ran quite well but much faster than I had expected. The simple carb was much similar to the one used on the series of Tiny hit and miss engines so with the increased bore diameter of this engine I thought it would run slower.
I took it back down to the shop and installed the original throttling carb then went back out for another try.
While turning it over I started opening the needle valve until it caught and ran. While running I adjusted the ignition timing from the initial setting of about 15 degrees to almost 25 and it smoothed right out.
Here is the video published on Youtube.
Thanks for following the build and commenting along the way.
gbritnell
P.S. I'll have it at the Zanesville engine show this weekend.
https://youtu.be/c_KtDdeMepk


__________________
Talent unshared is talent wasted.
gbritnell is offline  
10
People Like This 
Reply With Quote
Old 10-20-2017, 12:18 PM   #2
ShopShoe
Senior Member
 
ShopShoe's Avatar
 
Join Date: Oct 2010
Location: Central Iowa, Central U.S.A.
Posts: 710
Liked 104 Times on 94 Posts

Default

Outstanding.

I followed the build, but I didn't really understand how small it is until now. It's such a nice runner and it still kinda sounds like a Holt.

I envy your speed in completing projects. Best of luck with what's next.

Regards,

--ShopShoe
ShopShoe is offline  
 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tiny Inline Four 4 cylinder engine for sale itbookham Buy / Sell / Trade / eBay 1 02-13-2017 08:44 PM
Tiny Inline 4 Cylinder IC kcmillin A Work In Progress 340 06-21-2015 09:14 PM
Tiny Inline 4 Cylinder IC kcmillin Finished Projects 15 05-24-2011 03:40 AM
Cole 4 cylinder holt from castings enginebob Engines From Castings 5 09-22-2009 01:49 AM



Newest Threads






- Top - Member List