Project of the Month built by Rustkolector

Help Support Home Model Engine Machinist by donating using the link above or becoming a Supporting Member.
Home Model Engine Machinist > The Tools and Tips > Machining with Disabilities > Bridgeport Varispeed spindle RPM dial

Reply
 
Thread Tools
Old 01-25-2018, 12:48 AM   #1
GailInNM
Administrator
HMEM_ADMIN.png
 
GailInNM's Avatar
 
Join Date: Feb 2008
Location: Albuquerque, NM, USA
Posts: 2,125
Liked 287 Times on 239 Posts
Likes Given: 111

Default Bridgeport Varispeed spindle RPM dial

The Bridgeport 2HP Varispeed head has two small windows with the RPM for the high and low ranges showing through them. The numbers are small but adequate for those with normal vision. On a standard model the windows are about 5-1/2 feet above the floor. I have a CNC version so the windows are 6 feet above the floor.. Since I am a little feller that is about a foot above my eye level. With decreasing vision the only way I could use the standard dial was with a step stool, magnifier, flash light and then adjust the speed with my extra hand. So the giant dial was born.

Before starting set he speed to and easy to remember RPM. This makes it easier to set the pointer later.

The dial cover was removed (2 screws) and a mounting plate for the dial made up with a recess for the raised lettering and other features on the dial cover with mounting holes to match those on the dial cover. An oversize hole for the pointer shaft was drilled int the dial cover using the mounting plate as a template. The nut holding the original dial in place and replaced with the pointer shaft. The mounting plate and dial cover were installed using longer flat head screws.

I made my dial 7 inches in diameter. I made it out of black on yellow engraving stock on a laser engraver. It could be made by printing the dial on paper and gluing it a sheet metal disk. If made of paper I would suggest covering it with clear plastic or otherwise protecting it to make cleaning easier.

The dial was installed on the mounting plate and the pointer attached aligning it to the speed that that was set on the head before starting modification.

The photos show an unmodified manual model Bridgeport and the modification as installed on my CNC model.

Three PDF files are attached showing the parts and dial suitable for printing. The same files are included as DWG files in a ZIP file.

Gail in NM


Attached Thumbnails
BPSpeed-0001.jpg   BPSpeed-0002.jpg  
Attached Files
File Type: pdf all.pdf (35.5 KB, 47 views)
File Type: pdf dial parts.pdf (28.0 KB, 40 views)
File Type: pdf dial.pdf (13.5 KB, 41 views)
File Type: zip Speed Dial.zip (37.7 KB, 18 views)
__________________
Gail in New Mexico, USA
I would like to be the kind of person my dog thinks I am.
GailInNM is offline  
3
People Like This 
Reply With Quote
Old 01-25-2018, 04:51 AM   #2
428Bird
HMEM_LIFETIMESUPPORTER.png
 
428Bird's Avatar
 
Join Date: Jul 2017
Location: Houston, Texas
Posts: 19
Liked 1 Times on 1 Posts

Default

That's Awesome!
__________________
Britt Bettell
Houston, Texas
428Bird is offline  
 
Reply With Quote
Old 01-25-2018, 09:21 PM   #3
BaronJ
Grumpy Old Git.
 
BaronJ's Avatar
 
Join Date: Dec 2013
Location: Yorkshire, UK
Posts: 630
Liked 232 Times on 195 Posts
Likes Given: 91

Default

Hi Gail,

That is very neat I can think of a couple of uses for your idea.
Thanks for posting it.
__________________
Regards:
Baron.
BaronJ is offline  
 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mounting a dial indicator in a spindle? JeffF General Engine Discussion 16 08-04-2017 02:53 PM
Used Bridgeport benster Tools 5 12-31-2015 04:38 AM
Bridgeport is on the way Sshire The Shop 36 06-27-2013 05:59 PM
Dial indicator nkalbrr Tools 10 02-22-2011 12:20 AM
Bridgeport spindle motor conversion zeusrekning Machine Modifications 7 05-30-2008 02:49 AM



Newest Threads






- Top - Member List