Project of the Month built by TonyM

Help Support Home Model Engine Machinist by donating using the link above or becoming a Supporting Member.
Home Model Engine Machinist > The Tools and Tips > Tips and Tricks > AL320G - Threading Dial

Reply
 
Thread Tools
Old 04-12-2017, 11:00 PM   #21
bazmak
BAZMAK
HMEM_SUPPORTER.png
 
bazmak's Avatar
 
Join Date: Dec 2012
Location: adelaide south australia
Posts: 1,707
Liked 902 Times on 520 Posts
Likes Given: 720

Default

When single point threading I power feed to within a few threads and then turn the chuck by hand.Avoids hairy scarie


bazmak is offline  
 
Reply With Quote
Old 04-26-2017, 07:43 AM   #22
goldstar31
 
Join Date: Feb 2010
Posts: 1,439
Liked 319 Times on 273 Posts
Likes Given: 501

Default

Quote:
Originally Posted by bazmak View Post
When single point threading I power feed to within a few threads and then turn the chuck by hand.Avoids hairy scarie
Apologies for the delay but the Victoria Cross Memorial combined with the Anzac Day in London sort of got in the way!

So my present thoughts are the realisation that many small and new Far East lathes have a slowest speed of 100 rpm. When push came to shove 'my' 918 actually ran at a mind boggling 130rpm which was too high to avoid nervous breakdowns.

OK, I tamed the beast by newer pulleys but the classic mandrel handle made life easier- and safer.

Just a constructive thought?

Norman


goldstar31 is offline  
 
Reply With Quote
Old 04-26-2017, 10:12 AM   #23
joco-nz
 
joco-nz's Avatar
 
Join Date: Feb 2016
Location: Wellington, New Zealand
Posts: 411
Liked 111 Times on 86 Posts
Likes Given: 87

Default

Norman - yes the good old handle ala:
Picture from member albums on model-engineer.co.uk (http://www.model-engineer.co.uk/site...526/469416.jpg)


A very good option and even though my lathe will get down to 60rpm still a viable path if that extra bit of control is needed.


__________________
James,
Wellington,
New Zealand
joco-nz is offline  
 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Yet another QCTP thread (BXA on AL320G) rodw Machine Modifications 57 12-27-2016 11:51 PM
AL320G Lathe - The Big Clean joco-nz The Shop 58 10-18-2016 12:22 AM
Modding my threading drop in dial Blogwitch Machine Modifications 1 02-06-2015 02:09 PM
Threading with an AL320G Lathe Maryak Machine Modifications 22 11-22-2014 10:00 PM
Threading dial question SmoggyTurnip General Engine Discussion 72 09-03-2008 06:49 PM



Newest Threads






- Top - Member List