Project of the Month built by Stefan-K
Home Model Engine Machinist > Whats Left? > The Break Room > Yet another Arduino Powered RT

Reply
 
Thread Tools Display Modes
Old 01-11-2017, 06:31 AM   #1
Foozer
HMEM_LIFETIMESUPPORTER.png
 
Join Date: Nov 2008
Location: Camano Island, WA
Posts: 1,043
Liked 48 Times on 47 Posts
Likes Given: 2

Default Yet another Arduino Powered RT

Took the little snippet
"laststep = round(stepsDiv * lastPosition);
nextstep = round(stepsDiv * currentPosition);
divSteps = abs(nextstep - laststep);"
from Chuck Fellows RT program, wrapped it with a NES Controller,
a 20x4 LCD, menu one for divisions, one for degrees, variable step rate.
mounted a little 3" RT to an angle Plate, attached a little Taig chuck. . .
Ya way too much free time...

Gave it a try and Poof, cut a hex. Definitely needs a tail-stock support but that's for another day.









Had to skew the RT to the angle plate as plate, well more of a case of working with what is laying around. It seems to work, cut 6 which is a go over of cut one was clean. What to do with it? Something will come up, it was fun to do...


__________________
"Nothing is more irritating than that which exposes the pedigree of ideas"----Lord Acton----
Foozer is offline  
joco-nz Likes This 
Reply With Quote
Old 01-14-2017, 10:25 PM   #2
Foozer
HMEM_LIFETIMESUPPORTER.png
 
Join Date: Nov 2008
Location: Camano Island, WA
Posts: 1,043
Liked 48 Times on 47 Posts
Likes Given: 2

Default

Little too cold out - There's snow on them hills . . .



So went to the cubby hole room and played with the RT - Centering the chuck mount? Lets just say would not place that high on my Joy Joy list...And then OK use a .187 regular end mill to cut 'Vs' every 15 degrees--Math! Find the top, move Y x amount, lower Z x amount-- Item 2 not for the Joy Joy list.
Then after many repeated movements-- The end result - A thing -


And it's not even saw toothed (won't mention try 1)
Having the RT mount same thread as the lathe spindle, That's a JoyJoy...
__________________
"Nothing is more irritating than that which exposes the pedigree of ideas"----Lord Acton----
Foozer is offline  
joco-nz Likes This 
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Arduino and I2c LCD chucketn Software and Programming 33 03-30-2015 11:29 PM
Arduino anyone canadianhorsepower The Break Room 1 01-20-2015 04:26 AM
Arduino and Vista goldstar31 Software and Programming 9 01-11-2015 07:43 PM
Arduino LCD Keypad gld Questions and Answers 1 01-05-2015 09:22 PM
Arduino ? Tin Falcon CNC Machines and Conversions 46 07-09-2012 04:47 PM





Newest Threads






- Top - Member List