Project of the Month built by TonyM

Help Support Home Model Engine Machinist by donating using the link above or becoming a Supporting Member.
Home Model Engine Machinist > Whats Left? > Buy / Sell / Trade / eBay > looking for conrod bolts

Reply
 
Thread Tools
Old 09-18-2017, 08:40 PM   #1
PeterLM
 
Join Date: Jun 2017
Posts: 1
Default looking for conrod bolts

Im looking for a conrod bolt that can be purchased ready made. I do not have the tools to make them in the quality I need, so I better by them.
So please drop me a line If you know where to get them.

The conrods are quite narrow at 8 mm ( or close to 1/4") and the bolts must not be wider. The heads can be tx or whatewer.
The conrods are still on the drawing table, so the length of the bolts are not settled yet.

It is for a small V4 engine. so I need 8 bolts for the engine, and a mate of mine is making one as well. So we need at least 16 bolts.

Peter


PeterLM is offline  
 
Reply With Quote
Old 09-18-2017, 11:11 PM   #2
stevehuckss396
Senior Member
HMEM_SUPPORTER.png
 
stevehuckss396's Avatar
 
Join Date: Nov 2008
Location: Sterling Heights, MI
Posts: 3,727
Liked 934 Times on 629 Posts
Likes Given: 8

Default

i am not sure what type of bolt you are referring to. i just use socket head cap screws and if you are nervous that they may come loose, just put a drop of loc-tite on them before you install them.
stevehuckss396 is offline  
 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ML Midge Conrod jack620 General Engine Discussion 13 01-17-2013 10:11 PM
Kiwi Conrod vcutajar General Engine Discussion 3 04-24-2012 07:44 PM
car conrod? pcw General Engine Discussion 6 10-05-2011 09:45 PM
conrod hopeless General Engine Discussion 2 06-01-2010 03:43 PM
Stripper Bolts= Shoulder Bolts- for pivot point? magic.42 General Engine Discussion 6 02-22-2010 02:10 AM



Newest Threads






- Top - Member List