Project of the Month built by apointofview
Home Model Engine Machinist > HMEM > Welcome > An Introduction

Reply
 
Thread Tools Display Modes
Old 02-11-2017, 03:42 PM   #1
Tomlinson
 
Join Date: Feb 2017
Posts: 5
Liked 2 Times on 1 Posts

Default An Introduction

Hello All.

I'm Eric from East Yorkshire, U.K.
I have been making models of some description for more years than I care to remember. After reading these online Forums for some years I decided it was time to join and maybe get involved.
Like most youngsters, I made model aircraft and radio equipment and not until many years (and a family ) later, could I afford a lathe and start building mechanical things.
I enjoy looking at photos and videos of other modellers projects and hope to post some of mine.
A few months ago, in between projects I tried to make a couple of movies using a new 'compact camera'. Results were reasonable, the sort of videos I like to watch, so I posted them, after some difficulty, to YouTube.
Hopefully I will be able to post links to these videos and photos of some of my completed projects to the appropriate places on the Forum.
It's taken me a while to get here, but I have made a start.


Tomlinson is offline  
 
Reply With Quote
Old 02-11-2017, 04:28 PM   #2
GailInNM
Administrator
HMEM_ADMIN.png
 
GailInNM's Avatar
 
Join Date: Feb 2008
Location: Albuquerque, NM, USA
Posts: 2,107
Liked 276 Times on 233 Posts
Likes Given: 109

Default

Welcome to HMEM Eric.
Looking forward to your videos and photos.
Gail in NM


__________________
Gail in New Mexico, USA
I would like to be the kind of person my dog thinks I am.
GailInNM is offline  
 
Reply With Quote
Old 02-11-2017, 06:56 PM   #3
Blogwitch
Ex Bogstandard
HMEM_SUPPORTER.png
 
Blogwitch's Avatar
 
Join Date: Dec 2008
Location: Crewe, UK
Posts: 3,287
Liked 551 Times on 415 Posts
Likes Given: 49

Default

As they say, a picture is worth a thousand words, so a video should be worth millions.

Nice to see you wanting to become involved.


John
__________________
If you don't try it, you will never know if you can do it!!
Blogwitch is offline  
 
Reply With Quote
Old 02-11-2017, 10:27 PM   #4
Herbiev
Administrator
HMEM_ADMIN.png
 
Herbiev's Avatar
 
Join Date: Jan 2011
Posts: 1,999
Liked 247 Times on 208 Posts
Likes Given: 76

Default

And welcome from South Australia. Looking forward to some videos
__________________
Herbie
Hallett cove
South australia
Herbiev is offline  
 
Reply With Quote
Old 02-11-2017, 10:42 PM   #5
bazmak
BAZMAK
 
Join Date: Dec 2012
Location: adelaide south australia
Posts: 1,329
Liked 584 Times on 356 Posts
Likes Given: 531

Default

Hi Eric,where in east Yorkshire.All the the best from Bazmak
Barry from Leeds now in Oz
bazmak is offline  
 
Reply With Quote
Old 02-12-2017, 02:48 AM   #6
Cogsy
 
Cogsy's Avatar
 
Join Date: Jul 2012
Location: Perth, Western Australia
Posts: 1,410
Liked 345 Times on 266 Posts
Likes Given: 297

Default

Welcome from Western Australia. I haven't watched any of the videos on your channel as yet, but the thumbnails look like the sort of stuff I like to watch.
__________________
Al.
______________________
I'd like to be a perfectionist, but I lack the patience...not to mention the skill...
Cogsy is offline  
 
Reply With Quote
Old 02-12-2017, 09:47 AM   #7
Tomlinson
 
Join Date: Feb 2017
Posts: 5
Liked 2 Times on 1 Posts

Default

Thanks for the welcome guys and to answer Bazmak's question, I live in Cranswick near Driffield, East Yorks.
Tomlinson is offline  
 
Reply With Quote
Old 02-12-2017, 11:57 AM   #8
Cogsy
 
Cogsy's Avatar
 
Join Date: Jul 2012
Location: Perth, Western Australia
Posts: 1,410
Liked 345 Times on 266 Posts
Likes Given: 297

Default

I have watched your videos now and I must say they are some extremely nice engines you have made. You should be justifiably proud!


__________________
Al.
______________________
I'd like to be a perfectionist, but I lack the patience...not to mention the skill...
Cogsy is offline  
 
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Re Introduction Donnie Welcome 1 12-30-2016 02:21 AM
Introduction ValveGear Constructor Welcome 1 03-16-2012 04:08 PM
Introduction harvinder909 Welcome 2 02-24-2012 05:25 AM
Introduction rythmnbls Welcome 13 01-18-2012 07:30 PM
Introduction MatthewDS About Home Model Engine Machinist 9 12-13-2011 06:13 PM





Newest Threads






- Top - Member List