Project of the Month built by dnalot
Home Model Engine Machinist > The Tools and Tips > The Shop > Setting up Shop Questions - from an NZ learner

Reply
 
Thread Tools
Old 04-18-2017, 07:21 PM   #511
joco-nz
 
joco-nz's Avatar
 
Join Date: Feb 2016
Location: Wellington, New Zealand
Posts: 327
Liked 73 Times on 56 Posts
Likes Given: 72

Default

Norm - no offence at all!

Adding some length to the "loose angle thing" is on the list as is a tensioning bolt for when its trying to clamp on somehting that doesnt go past the point of rotation.

I've managed to get by without having to tension/untension stuff too much. But you are right having to reach for a spanner is wearing thin.

There are other mods by a fellow kiwi that I like the look of which are shown here: http://www.modelenginemaker.com/inde...ic,6363.0.html

I also have some ideas re leveraging this big ass frame to create some flat support/mounting space to the right of the blade (look at the saw from clamp handle end). If do that then I get the ability to mount some big rounds of steel or caste iron to be sliced off in a single cut for such things as fly wheels in a single cut. Where as at the moment I need to muck about with a fussy multi cut process as the boom hits the top of the round.

All good fun.

Cheers,
J.


__________________
James,
Wellington,
New Zealand
joco-nz is offline  
 
Reply With Quote
Old 04-18-2017, 08:56 PM   #512
bruedney
 
Join Date: Nov 2014
Location: Wellington NZ
Posts: 45
Liked 10 Times on 7 Posts
Likes Given: 28

Default

Might have to get you to build me one of those.


bruedney is offline  
 
Reply With Quote
Old 04-19-2017, 01:24 AM   #513
DJP
 
Join Date: Dec 2012
Posts: 166
Liked 47 Times on 41 Posts

Default

Your frame looks sturdy enough to stand on which is a good thing. When cutting with the blade vertical I need to place my knee on the saw bed to prevent it from tipping backwards. The weight of the motor and gear box hang out enough to make it tippy.

You may need to stand on your frame when pushing a work piece into the blade. Now would be the time to weld on extra custom provisions if you need them.
DJP is offline  
 
Reply With Quote
Old 04-19-2017, 02:24 AM   #514
joco-nz
 
joco-nz's Avatar
 
Join Date: Feb 2016
Location: Wellington, New Zealand
Posts: 327
Liked 73 Times on 56 Posts
Likes Given: 72

Default

DJP - good points and I have some ideas for rapid deployed feet to help with leveling on crappy garage floors and deal with the inevitable small amount of twist in the welded frame.

On the tipping side I deliberately designed to cope with the. The base goes back a little further than where the motor hangs when boom is vertical. Net effect is I have wheels slightly beyond he heavy motor meaning its pretty dang stable.

Still have more welding to do for add ons. Which should see me finishing up this bottle of co2/argon. Then its onto to pure argon and TIG welding for some new fun. :-)
__________________
James,
Wellington,
New Zealand
joco-nz is offline  
bazmak Likes This 
Reply With Quote
Old 04-19-2017, 08:56 AM   #515
joco-nz
 
joco-nz's Avatar
 
Join Date: Feb 2016
Location: Wellington, New Zealand
Posts: 327
Liked 73 Times on 56 Posts
Likes Given: 72

Default

Quote:
Originally Posted by bruedney View Post
Might have to get you to build me one of those.
It's a little over engineered, but its rather nice and SOLID.
__________________
James,
Wellington,
New Zealand
joco-nz is offline  
 
Reply With Quote
Old 04-19-2017, 09:03 AM   #516
bruedney
 
Join Date: Nov 2014
Location: Wellington NZ
Posts: 45
Liked 10 Times on 7 Posts
Likes Given: 28

Default

Over engineered - by you - never!!!


bruedney is offline  
 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Learner in Houston says hello Naiveambition Introduction 1 03-13-2013 03:37 AM
Setting up a VFD? lazylathe General Engine Discussion 64 04-07-2012 02:31 AM
setting top slide firebird General Engine Discussion 4 12-11-2008 10:38 PM
Setting up my new shop Bogstandard The Break Room 246 09-23-2008 01:21 PM
Setting up shop. Tin Falcon Tips and Tricks 4 12-23-2007 05:18 PM



Newest Threads






- Top - Member List