Project of the Month built by dnalot
Home Model Engine Machinist > The Tools and Tips > Tools > Help with a knurling tool

Reply
 
Thread Tools
Old 04-25-2017, 02:55 PM   #31
Blogwitch
Ex Bogstandard
HMEM_SUPPORTER.png
 
Blogwitch's Avatar
 
Join Date: Dec 2008
Location: Crewe, UK
Posts: 3,369
Liked 574 Times on 433 Posts
Likes Given: 52

Default

These should display better Baz





John


__________________
If you don't try it, you will never know if you can do it!!
Blogwitch is offline  
 
Reply With Quote
Old 04-25-2017, 11:00 PM   #32
bazmak
BAZMAK
 
Join Date: Dec 2012
Location: adelaide south australia
Posts: 1,431
Liked 658 Times on 390 Posts
Likes Given: 567

Default

Thanks john,there were a set of 3 here is the brass one
I have lots of sample knurls now so will make a few thumb screws
Always seem to want one but usually couldn't be bothered setting
up for poor quality knurl.Hope to get some use out of this wonderful tool https://youtu.be/0WgiDyafkfU


bazmak is offline  
 
Reply With Quote
Old 04-26-2017, 06:42 AM   #33
bazmak
BAZMAK
 
Join Date: Dec 2012
Location: adelaide south australia
Posts: 1,431
Liked 658 Times on 390 Posts
Likes Given: 567

Default thumbscrews

Well I now have a surplus of knurled round bar so made a few thumbscrews
varios sizes and shapes.Made and fitted one to the mark3 knurlhead to replace
the nyloc nut.Ideal,loosen off, feed the knurls to the work to set centre height
and nip up finger tight for cutting.Just takes out the slight rock
bazmak is offline  
 
Reply With Quote
Old 04-26-2017, 08:28 AM   #34
Blogwitch
Ex Bogstandard
HMEM_SUPPORTER.png
 
Blogwitch's Avatar
 
Join Date: Dec 2008
Location: Crewe, UK
Posts: 3,369
Liked 574 Times on 433 Posts
Likes Given: 52

Default

You can never have enough tightening knobs

I wasn't trying to be awkward by showing those two videos of yours, just your links didn't work for me, so I made them universal.


John
__________________
If you don't try it, you will never know if you can do it!!
Blogwitch is offline  
 
Reply With Quote
Old 04-26-2017, 12:55 PM   #35
bazmak
BAZMAK
 
Join Date: Dec 2012
Location: adelaide south australia
Posts: 1,431
Liked 658 Times on 390 Posts
Likes Given: 567

Default

no problems john,im gratefull just don't know what I'm doing wrong
and how to correct it
bazmak is offline  
 
Reply With Quote
Old 04-26-2017, 05:56 PM   #36
Blogwitch
Ex Bogstandard
HMEM_SUPPORTER.png
 
Blogwitch's Avatar
 
Join Date: Dec 2008
Location: Crewe, UK
Posts: 3,369
Liked 574 Times on 433 Posts
Likes Given: 52

Default

All I do Baz is once I get the video up and running on Youtube, all I do is copy the URL at the top LHS, and once you paste it into your post in it's own line, it should open it up like I did with the two above.

This is what the URL should look like, without the quote marks.

"https://www.youtube.com/watch?v=0WgiDyafkfU&feature=youtu.be"

and when posted direct into your post, it should come out like this.



John


__________________
If you don't try it, you will never know if you can do it!!

Last edited by Blogwitch; 04-26-2017 at 05:59 PM.
Blogwitch is offline  
bazmak Likes This 
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Modified Knurling Tool Holder kquiggle Tools 2 01-30-2014 08:01 PM
shop built knurling tool dnalot Tools 21 04-06-2013 11:56 PM
Aloris #19 style lathe knurling tool petertha Tools 6 12-07-2012 01:49 AM
THIS is a Knurling Tool Omnimill Tools 5 10-22-2010 10:04 PM
Knurling Tool For Mini Lathe keys Tools 9 05-06-2010 10:33 PM



Newest Threads






- Top - Member List