toolznthings

Gift Premium Subscription To toolznthings

Join Date:

12-11-2013

Last Activity:

01-16-2017 12:14 AM

Likes Given: 103

175 Likes on 84 Posts 

LATEST ACTIVITY

  • Posted in thread: Project of the Month - January 2017 on 01-06-2017 at 11:43 PM
    Neat project ! :thumbup: Congrats :)Brian

  • Posted in thread: Simple single cylinder compressed air engine on 01-04-2017 at 01:09 AM
    Looks great ! Looking forward to see it running.Brian

  • Posted in thread: Rudy's Pioneer Engine on 12-29-2016 at 05:59 PM
    Finished Rudy's pioneer engine with modifications and decided to do some woodworking and made a
    box for the engine. Nice change of pace and a good learning experience working with wood. I
    plan on maki...

  • Posted in thread: Project of the Month - December 2016 on 12-10-2016 at 01:20 AM
    Hats off to you ! Beautiful job ! :thumbup:Congratulations,Brian

  • Posted in thread: Real 1144 "Stressproof" on 12-09-2016 at 01:21 AM
    Hi,McMaster will stand by their sale so you should maybe give them a call. Explain that the
    material is not cutting correct and you are knowledgeable. Your are not getting the crank hot
    from the grind...

  • Posted in thread: Real 1144 "Stressproof" on 12-08-2016 at 01:24 AM
    Small pieces from McMaster Carr when I need it quick, or Alro steel.Sounds like you got
    something besides 1144. :mad:

  • Posted in thread: band saw on 12-08-2016 at 01:21 AM
    Hi,From the information I got from tech support at Automation Direct, this motor maintains "
    power " throughout it's rated rpm range. The motor I have has a 10:1 ratio and is inverter
    duty. Motor rpm ...

  • Posted in thread: band saw on 12-07-2016 at 01:31 AM
    Because of what I do on a regular basis and my need for variable speed I converted my older 14"
    Rockwell band saw from gearbox set up to a 3 phase inverter motor and VFD control. Direct drive
    from mot...

  • Posted in thread: Re-using copper tubing - yay or nay? on 11-28-2016 at 01:19 AM
    Hi,May end up being more work in the end than what the tubing is worth ? May need annealed if
    it's been " worked " much during the original install.

  • Posted in thread: Project of the Month - November 2016 on 11-13-2016 at 12:35 AM
    Another well deserved congratulations on your build !:thumbup:Brian

ENGINE REGISTRY ENTRIES:
  • Lyle Peterson Spool Valve Engine
    Lyle Peterson Spool Valve Engine
  • New Horizontal with Cross Head
    New Horizontal with Cross Head
  • Rupnow Double Horizontal
    Rupnow Double Horizontal
  • RUPNOW BEAM ENGINE
    RUPNOW BEAM ENGINE
  • Ray HasBrouck # 4 Engine 2x Scale
    Ray HasBrouck # 4 Engine 2x Scale
  • RayHasBrouck # 3 Engine
    RayHasBrouck # 3 Engine
0 COMMENTS
POST A COMMENT


Newest Threads