Recent content by miglincit

To save space on the sheet and, as the results/digit are always the same, I removed the last digit (1/1000 of mm) and added a single column for it. To be fair I could have done this to the 1/100 too but did not recognize at that time.... I did no search for any plans or casting in Metric...

Why don't you just align the bar with the surface of the chuck? No need for an additional screwed-in bar.

Hi John, how much is 10 per in any currency ;-) And, how much would shipping be to Austria? greetings Thomas

MHO: Shouldn't your considerations start with the accuracy you want to achieve? For typical modeling chinese quality seems pretty ok. I owe a lot of different brands and all of them provide enough precision for my tasks. And if you measure fitting parts with the same device/accuracy absolute...

why not try https://www.onshape.com/ ? It is free, almost SolidWorks and runs in a browser independant of the OS. Thomas

Hi Andrew, typically there is a default-value for all those numbers, and only those parts or surfaces which have to exceed this default value are mentioned or marked explicitly. So I would go with this: shiny surfaces have to be polished to your or your wife's personal wishes; cylinder...

Haven't you got a manual with it ? I found one here: https://www.exoror.com/datasheet/VFD.pdf and on page 16 (chapter 3. Basic Connection Diagramm) you can fine the information you were looking for: it seems that the functions you would like to have are already set as factory default - the...

Your questions rely on the type of VFD you are going to use - so it would be a support to any answer if you share this meaningful information with us. E.g. I am using an Omron MX2 VFD. And I have to set certain parameters to achieve the behavior you described (and which fits to my application...

I do not think so - what type of chain would he buy? Without doing a minimum of calculation he would get the perfect wrong one. Defining the maximum load is not sufficient! I only hope, that he and nobody else will get injured..... Thomas

Your beam alone would weight about 50kg - this has to be added to any load you want to lift! The blue crane has a counterweight and the white one a base which support the torques and forces applied due to the load - these are perfect different to what you want to build. There is a very...

ad babolottino: as John said: If you do not understand how the forces and torques are applied to the different mounting points and to the joints of your construction get a professional. This is not something you just copy&paste from somewhere else. E.g. the maximum load applied...

Hi Ken, Arnolds family name is SCHWARZENEGGER btw. :D greetings from Vienna/AT Thomas

I tried an additional google search and came to a bunch of interesting findings on ebay.at: https://www.ebay.at/sch/sis.html?_itemId=371783091175&_nkw=ALTES+UHRMACHER+WERKZEUG+GEWINDESCHNEIDEISEN&_mPrRngCbx=1 just give it a try ;) And found a swiss shop: https://www.fritzsteiner.ch/ were you...

Today finally I had a talk with a guy from the local store in Vienna. The whole set (https://www.j-felber.at/Handwerkzeug...-2-5-2373.html) would cost about €425,-. Individual taps ~€15,- and a dies ~€20,-. Sending them to Finland seems no problem - if you cant register just send them an...

This was something I did not considered.... I will, but please give a week or so. Thomas