Last Activity:03-01-2014 4:28 PM
7 Likes on 5 Posts
Posted in thread: Black protective oil coating on 12-26-2013 at 11:18 PM
Hello All,As Gedeon Spilett ( hello François !) said, I burnished steel heating behold my
method:I put the parts on a hotplate (1500W) with an electronic controller (home made) heat
units at 400 ° C ...
Posted in thread: Electric furnace on 09-18-2013 at 11:44 PM
Hi all,NICE furnace Kadora Thm:
Posted in thread: Electric furnace on 06-07-2013 at 08:28 PM
Hello kadora,I bought my bricks from a supplier in my city: >>>> #JM23 60 or #JM26 60 the
bricks (1350 ° C) that I used are no longer in the catalog, only 1260 ° and 1450 °.
Posted in thread: D day on 06-06-2013 at 12:52 PM
June 6, France remembers. Never forget !!I thought for ALL of these young soldiers who died for
Posted in thread: Electric furnace on 06-06-2013 at 07:02 AM
kadora, If you want to make an oven, you should consider ALL equipment purchases:4 resistors:
150 € (local supplier)15 Bricks: 60 € (local supplier)1 PID controller temp: 40
Posted in thread: Electric furnace on 06-05-2013 at 11:20 PM
Hello all,I have not bought my resistors on ebay, I contacted a French manufacturer that has
wound according to my request. "descriptif" ==> description:Manufacturing coil resistors are
custom made a...
Posted in thread: Electric furnace on 06-04-2013 at 11:08 PM
Hi kadora,Yes, 2000W is fine.My oven is manufactured with 4 dual resistors wired in series:
Kanthal A1, max temp 1450°C The total power is 2200 W.
Posted in thread: Electric furnace on 06-03-2013 at 06:46 PM
Hello guys, hello kadora,Here are the dimensions of the oven; Outside: 285x285x370mm (mailbox
of french postal service ;)) , Inside: 140x140x200mm.Bricks are used for maximum temperature of
1350 ° C.
Posted in thread: Electric furnace on 06-02-2013 at 12:02 AM
Hello guys, Kadora, I built an electric furnace for brazing. I also used to melt aluminum.
[FONT=Comic Sans MS] Here the construction of the oven; the total cost is 200€
Posted in thread: # 2 Oiler Plans? on 12-15-2011 at 01:40 AM
Hi Everyone, I am working on a 1/4 scale Gade motor. It calls for a #2 drip oiler. Does anyone
know of any plans for this oiler? How about a cheap source for glass or acrylic tubing for
small oilers? ...