lazylathe

LATEST ACTIVITY

• Posted in thread: Scott Flamelicker (Vacuum Engine) on 07-24-2012 at 04:01 PM
  Hi Don,Please refer to the very first post on this topic.Andrew

• Posted in thread: All on 07-18-2012 at 11:40 PM
  Thank you for all the hard work, time and effort you put into being a moderator here!Hopefully
  this means that the SB will be making chips sooner than expected!!!:DSee you around the
  forums!Andrew

• Posted in thread: Hmem sold on 07-18-2012 at 10:48 PM
  Thanks for the update and info Rick!A man's got to do what a man's got to do!Hopefully in time
  we will get to see some of your work?I for one am interested in what you do at home in your
  workshop!Some...

• Posted in thread: A Jan Ridders Duo on 07-16-2012 at 02:22 PM
  Now that is cool Frazer!!!Congrats on a great runner!!!!Even though it is a double i am still
  counting it as a single engine!!! :big:Andrew

• Posted in thread: Clausing 8520 - Low range?? on 07-16-2012 at 02:20 PM
  th_wwpWhat collet system did you use Mosey?I am getting a bit tired of beating the bar...
  :big:Andrew

• Posted in thread: Clausing 8520 - Low range?? on 07-15-2012 at 09:17 PM
  Another option is to install a VFD and run the mill off the original 3 phase motor.That is how
  i have mine hooked up and i can get it from a few RPM's up to full speed with a twist of a
  knob.Lots of l...

• Posted in thread: 1/4 Scale Rider-Ericsson Pumping Engine on 07-12-2012 at 11:06 PM
  woohoo1 th_wav woohoo1Awesome stuff Bill!!Hope you had agreat time with the family and kids!I
  am also off this week but have been busy taking my car back and forth to the dealer and am not
  too happy.....

• Posted in thread: 1/4 Scale Rider-Ericsson Pumping Engine on 07-12-2012 at 11:37 AM
  Hi Bill,Great set of updates that i seem to have missed!!!Any news??? ;DAndrew

• Posted in thread: bedding down the lathe on 07-05-2012 at 05:21 PM
  Cool!We will be waiting for the pics! ;DI made my own bench when i first brought the ML7
  home.Thought it was rock solid till i turned the lathe on and it vibrated all over the
  place...If you are bored...

• Posted in thread: bedding down the lathe on 07-04-2012 at 07:22 PM
  Hi Paul,Not being the foremost authority on this but it does sound like your bench is a biton
  the flimsy side.Is it possible to upload some pics of the current setup?Just for chatting
  sake... I have m...