VIEW MY

hitnmiss49

Gift Premium Subscription To hitnmiss49

Join Date:

11-18-2007

Last Activity:

04-20-2014 2:47 PM

Likes Given: 11

6 Likes on 4 Posts 

LATEST ACTIVITY

  • Posted in thread: Butane (lighter gas) mixer for IC Engine on 02-09-2014 at 05:27 PM
    Chuck,Here is plans from the Floridaame page. It is not too hard to build one. I have built
    them but I don't have any on hand right now.Lonnie

  • Posted in thread: Dremal Tool on 11-18-2013 at 07:27 PM
    Mine is 3/4 x 12 TPI. Lonnie

  • Posted in thread: Ervin Engine plans on 10-20-2013 at 12:34 AM
    PM me and I can send them to you in pdf format.Lonnie

  • Posted in thread: Model of a Bessemer Hot Tube Oil Field Engine on 07-04-2013 at 08:39 PM
    Can't wait for the video on this engine Chuck. I know it is going to sound great. You sure are
    doing an excellent job just like you always do.Lonnie

  • Posted in thread: Fairbanks 80HP 3 Cylinder Model on 05-08-2013 at 09:54 PM
    Chuck,It is really looking good. Hope we will see a video very soon. Here is a link where I
    purchase model size nuts and bolts. I have always received my orders very quickly from them.
    Their prices ar...

  • Posted in thread: Bremen Caloric Engine Kit on 09-29-2012 at 11:12 PM
    I will consider it in the spring because I have way too many projects lined up to get it this
    winter. That sounds like a fair price. Any idea on shipping cost to the US?Lonnie

  • Posted in thread: October's Project of the Month on 09-28-2012 at 10:47 AM
    A well deserved honor.Lonnie

  • Posted in thread: Model of a Bessemer Hot Tube Oil Field Engine on 09-14-2012 at 05:26 PM
    Here is a drawing of my plan for the cylinder assembly (minus the hot tube...). I'm planning
    on only having coolant around the top part of the cylinder as shown to prevent having to seal
    around the ...

  • Posted in thread: Model of a Bessemer Hot Tube Oil Field Engine on 09-14-2012 at 01:27 PM
    Chuck, Here is is pic of a Pattin Bros Oilfield Engine. It looks almost identical to the model
    you are building. There are a few differences between it and the Bessemer, mainly the intake
    valve being ...

  • Posted in thread: Model of a Bessemer Hot Tube Oil Field Engine on 09-14-2012 at 11:41 AM
    Lonnie, what is the diameter of the piston rod where it comes out of the back of the cylinder?
    Trying to get an idea of what mine needs to be.Thx...Chuck Chuck, that rod is 1.625" diameter.
    Lonnie

0 COMMENTS
POST A COMMENT