Gift Premium Subscription To Mike1

Join Date:


Last Activity:

07-18-2017 6:32 PM

Likes Given: 2

19 Likes on 6 Posts 


  • Posted in thread: Removing machine tags on 09-13-2017 at 06:04 PM
    Hammer drive screws are what you need they come in all sizes and
    ike.Smaller amounts should be obtainable...

  • Posted in thread: Uploading photos with text in between on 07-18-2017 at 06:29 PM
    Thought I would give it a try 89942Water Pump for Centaur 89943Mike.Sorry forgot to resize !!

  • Posted in thread: Getting there. on 02-21-2017 at 03:02 PM
    Nice looking engines, time your twin as two separate engines.Mike.

  • Posted in thread: Steam engine piston on 01-24-2017 at 09:32 AM
    Your drawing shows a built up piston with the two rings sandwiched between the top and bottom
    of the piston, if it was me I would make the piston solid and cut grooves for rings or graphite

  • Posted in thread: Panther Pup Help - Won't Run! on 01-16-2017 at 07:15 PM
    If the engine gets hot when trying to start it may be too far retarded, set the ignition to
    fire at TDC and give that a try.Mike.

  • Posted in thread: Advice needed to dismantle ML7 Headstock spindle on 01-11-2017 at 09:01 AM
    Is this any help'Mike

  • Posted in thread: Jacobs chuck key on 04-17-2016 at 09:17 AM
    Your key No may be K30, but look at this stockist list it may help.

  • Posted in thread: Taper locks on 04-10-2016 at 08:55 AM
    This may help, hope the attachment worksMike.

  • Posted in thread: Anyone know anything about this grease? on 02-29-2016 at 08:58 AM
    This may help see here. X8401 Polyalkylene Glycol - Lithium Grease...Grade 1...Mike.

  • Posted in thread: Looking for an easy hit and miss on 12-20-2015 at 03:45 PM
    If your machines allow consider the Red Wing hit and miss engine, there is good cover of the
    build here.


Newest Threads