Last Activity:09-06-2012 2:53 AM
Posted in thread: Humour on 04-06-2009 at 07:47 PM
The Law and The PlumberSo a plumber goes to Judge Learned Hand's home, because of a leaking
pipe.He works for 20 minutes, and goes to the judge, saying, "I fixed the pipe; that's
$400."The judge looks...
Posted in thread: Adding a "home position" locator to vertical mill with tiltable head. on 10-17-2008 at 01:41 AM
Hi everyone,Here's one solution to increasing the rigidity of the X2 column base--> looks
like a good solution, but, I haven't tried it.
Posted in thread: A Question of Insert Interchangeability on 10-12-2008 at 02:30 AM
rake60, GailInNM, Thank you!Both links are great and have answered the questions ;D
Posted in thread: A Question of Insert Interchangeability on 10-12-2008 at 01:45 AM
Hi everyone,If one had a lathe or milling tool that came with TNMG-322 inserts, would TNMM-322
inserts be usable in the tool?What are the differences between TNMG and TNMM inserts?Does
anyone have a l...
Posted in thread: Displacement oil lubricators on 10-03-2008 at 01:43 AM
Gentlemen,I found this Bogstandard thread about Displacement Lubricators on another forum-->
It is quit thoroughly informative. Hopefully this helps.
Posted in thread: Three little pigs on 09-25-2008 at 01:45 AM
Thank you!Those look to be most usefull.I did a bit of 'net searching and found them at
Wholesale Tool in the U.S--> placed an order and the shipping cost via USPS to Canada was
$19.80 (overall a lo...
Posted in thread: Another madde Canuck on 08-24-2008 at 02:08 AM
Wait! Bogs has YouTube videos? How did I miss that?He does and ya can find Bogstandards YouTube
awesomeness HERE. Enjoy!
Posted in thread: Another madde Canuck on 08-23-2008 at 06:16 PM
Hmmm ... it works. It fits right in here. Actually, that should be the theme for the entire
forum! :big:Welcome aboard ... and watch out for the Fluffy Bunnies. :DBest regards,KludgeHeya
Kludge ;D I'm...
Posted in thread: Another madde Canuck on 08-23-2008 at 11:03 AM
Thats nothing,You should see my shop on a sunday night after a few coffees. We geriatrics can
really make the sparks fly.A big welcome.JohnTa John :big:_____WelcomeYou will fit right in,
You've heard ...
Posted in thread: Cam grinder fixture plans? on 08-22-2008 at 11:09 AM
Thank you! ;D