Ken K

Gift Premium Subscription To Ken K

Join Date:


Last Activity:

09-24-2017 6:09 PM

Referrals: 1

3 Likes on 3 Posts 


  • Posted in thread: Joe Tochtrop Castings 2cyl overhead cam on 07-25-2017 at 04:06 PM
    Joe also had a water pump kit. No one seams to making one anymore.Any plans to make any
    them.Ken K

  • Posted in thread: 1888 Forest 4 cyl from Lonestar Engine on 07-16-2017 at 06:50 PM
    If you want this kit, need to call Lone Star. Muary is closing it down!Ken K

  • Posted in thread: Sherline CNC Mill on 08-15-2015 at 06:15 PM
    I am looking for someone, that is, using a Sherline, CNC mill with Linux operating system, to
    find out how long, is the learning curve, and how they like the system. Some Background:In
    2002, I bought ...

  • Posted in thread: Newbie with a bucket list item & in need of guidance! on 07-31-2015 at 04:36 AM
    20 years ago, I was at your skill level, and this is what I did: No machining background, so
    went to the local junior college, and took lathe, and mill class. After you completed these
    class, you coul...

  • Posted in thread: The future of the "engine kit" on 07-08-2015 at 08:29 PM
    Bar stock engines, may be the way, to go, as the as less kits, are for sell, today, compared,
    to 10-15 years ago. I have purchased 43 different kits, over the years, and looking at the
    list, found 19,...

  • Posted in thread: Hit & Miss model on 07-21-2014 at 02:45 AM
    When you get around to building, a casting kit, you may want to check out the following:E & J
    Winter. 18 Kirrang Drive Medowie. NSW. 2318 Australia. Ph: 02 4981 7999Website: Buzz...

  • Posted in thread: Hit & Miss model on 07-20-2014 at 08:44 PM
    I agree with Johan. Philip Duclos plans in the Vllage Press Publications are a good place to
    start, building hit miss engines. There are 5-6 different ones. All the plans were good, if you
    made the pa...

  • Posted in thread: VJ Monitor Pump on 07-02-2013 at 07:47 PM
    I made a model VJ Monitor engine, and thought it would be nice, to also make the pump, for it.
    The plans list Iowa Miniature Engines, for the pump kit supplier. No one answers the phone
    number listed ...

  • Posted in thread: John Deere Kit by Robert Best on 03-21-2013 at 04:06 AM
    Some pictures of the ignitor would be very helpful. If you could include a 6" scale in the
    picture, it would help to determine the scale.Ken K

  • Posted in thread: John Deere Kit by Robert Best on 03-20-2013 at 03:34 AM
    The plans say it is a 1/3 scale, of a 1 HP engine.Ken K


Newest Threads