Ken I

Project of the Month Winner!!!

Gift Premium Subscription To Ken I

Join Date:


Last Activity:

09-12-2017 11:52 AM

Referrals: 1

Likes Given: 5

165 Likes on 136 Posts 


  • Cape Town, South Africa


  • Posted in thread: Chuck run out on 09-08-2017 at 02:48 PM
    I use bold text, capitals and italics to emphasize points all the time.I am not shouting - even
    if the hypertext Luddites say so.I've been doing what is recognized practice since long before
    they came...

  • Posted in thread: Project of the Month of September 2017 on 09-07-2017 at 02:20 PM
    Never a more deserving winner - I ran out of superlatives for this project - the scope,
    workmanship, the build log, detail, methodologies etc. etc.The finished project is nothing
    short of magnificent ...

  • Posted in thread: Chuck run out on 08-31-2017 at 02:15 PM
    I had a similar problem - looked really well made but ultimately junk. I will not buy anything
    that does not have a traceable brand name on it.Think about that - they should be proud of what
    they mak...

  • Posted in thread: Quarter Scale Merlin V-12 on 08-28-2017 at 02:13 PM
    Absolutely stunning - I'm dumbfounded at the craftsmanship and attention to detail - your
    documentation alone deserves outrageous praise.Having followed this post since the get go I've
    been mesmerized...

  • Posted in thread: Vederstein's Five Cylinder Wobbler - Finished!!! on 07-22-2017 at 03:41 PM
    I built a magnetically sprung V4 wobbler a while back I really like your 5 cylinder
    configuration.I have not thought of that - well done.Its ...

  • Posted in thread: PHOTO bucket on 07-20-2017 at 02:55 PM
    I understand that PB would want to charge for hosting to commercial sites such as Amazon, E-Bay
    etc.However I think they have totally missed that a great deal of its popularity is through
    turnover in ...

  • Posted in thread: Quarter Scale Merlin V-12 on 07-20-2017 at 09:33 AM
    6 x 400 rpm = 2400ppm = 4800rpm for a single cylinder (one pulse per two revs).To get 1600rpm
    it had to be a three cylinder. Or a 1 1/2 cylinder :D two stroke or redundant spark.

  • Posted in thread: Quarter Scale Merlin V-12 on 07-14-2017 at 01:41 PM
    The coolant reservoir was mounted at the top of the accessory rails so its coolant level could
    be set slightly higher than the coolant level in the heads. This will allow the engine to be
    filled from ...

  • Posted on Wire And Tube Bender in Downloads on 07/02/2017

  • Posted in thread: 3d printing sub forum? on 06-15-2017 at 09:44 AM
    I also have a 3D printer and would be interested.I use it all the time to check out concepts or
    prototype stuff - but I'm generally disapointed in mechanical strength.Have also bought some
    PLA filamen...

  • Wire And Tube Bender
    Wire And Tube Bender
  • Rotary Broaching Tool
    Rotary Broaching Tool
  • Gerry's Beam Engine Metric PDF
    Gerry's Beam Engine Metric PDF
  • Magnetically Sprung Wobbler
    Magnetically Sprung Wobbler
  • Levitating Mendocino Motor
    Levitating Mendocino Motor
  • V4 Wobbler In *.pdf
    V4 Wobbler In *.pdf
  • V4 Oscillator Motor
    V4 Oscillator Motor
  • Wire & Tube Bender
    Wire & Tube Bender
  • Improbability Drive Motor
    Improbability Drive Motor
  • Inside-Out Radial - Self Propelled Gear
    Inside-Out Radial - Self Propelled Gear
  • Six Shooter Elbow Engine
    Six Shooter Elbow Engine
  • Gerry's Beam Engine - Metric
    Gerry's Beam Engine - Metric
I'd rather have a bottle in front of me than a frontal lobotomy.

Newest Threads