VIEW MY

Ghosty

Gift Premium Subscription To Ghosty

Join Date:

09-21-2016

Last Activity:

09-24-2017 10:57 AM

Likes Given: 121

245 Likes on 108 Posts 

    ABOUT ME

  • NSW Australia

LATEST ACTIVITY

  • Posted in thread: Haynes Engines on 09-24-2017 at 03:44 AM
    Hi All,Just had a look at the cylinder block, bore and cylinder length are almost exact to a
    set of piston and cylinder assemblies that I had for another project that fell through.Cylinder
    is 1.5mm lo...

  • Posted in thread: Haynes Engines on 09-23-2017 at 08:22 AM
    Hi All,Just thinking if anyone has or are thinking of re engineering one into a metal running
    engine. I received one from my daughter as a fathers day gift.Looking at it, it looks like a
    nice project ...

  • Posted in thread: Quarter Scale Merlin V-12 on 09-16-2017 at 09:39 AM
    Terry, very sorry to hear and see the damage, is it repairable, or will you have to cut a
    couple of new gears? CheersAndrew

  • Posted in thread: Back to Steam on 09-14-2017 at 10:27 PM
    I have both Vol 1 & 2 in pdf format but too large to post here, PM email if you want a copy,
    CheersAndrew

  • Posted in thread: Quarter Scale Merlin V-12 on 08-28-2017 at 03:41 AM
    Terry,ABSOLUTELY BEAUTIFUL, is all I can say.th_wavwoohoo1Don't worry about model of the month,
    it should be model of the year, decade, century. CheersAndrew

  • Posted in thread: Quarter Scale Merlin V-12 on 08-24-2017 at 08:23 AM
    Terry, Congrats on the running engine. There was no way this would not run, all the effort,
    checks and rechecks that you have done over the build.:thumbup::thumbup: CheersAndrew

  • Posted in thread: Quarter Scale Merlin V-12 on 08-03-2017 at 07:35 AM
    Terry,For the coolant, have you looked at the Evens Waterless Coolant
    (https://www.evanscoolant.com/products/high-performance-coolant/)May be worth a look as it
    would not have to be drained, as normal...

  • Posted in thread: A Smaller Steam Engine For A Smaller Boat on 07-31-2017 at 11:03 PM
    Pete, If you make the whole brass piece and the acorn nut into one piece it would look a lot
    better, CheersAndrew

  • Posted in thread: A Smaller Steam Engine For A Smaller Boat on 07-24-2017 at 09:44 PM
    Pete, I think you going to need a bigger pond:), Sits about right and looks absolutely gorgeous
    on the water. CheersAndrew

  • Posted in thread: A Smaller Steam Engine For A Smaller Boat on 07-23-2017 at 10:16 PM
    Pete, looks great, won't be long before it gets wet. CheersAndrew

0 COMMENTS
POST A COMMENT


Newest Threads